Table of Contents
Advertisement
Instruction for Installation in a 19" Cabinet
In order to setting-up installing / removing the KISS 4U-Platform
into/from a 19" industrial cabinet, please observe the instructions
described in this manual.
The system has to be mounted and installed only by the service
person for this area familiar with the associated dangers.
Ensure there is sufficient air circulation around the device when
installing the KISS 4U-Platform.
The openings for air intake and exhaust on the device must not
be obstructed by objects.
Leave at least 5 cm (1.969 ") of free space in front and behind the
unit to prevent the device from possibly overheating!
The KISS 4U Platform should be installed into a 19" industrial
cabinet with slide rails.
The 19" industrial cabinet must stand firmly in place. You can
improve its stability by placing the components into it from the
bottom up. Heavy components should be placed down below.
If further stabilization is necessary, then bolt the 19" industrial
cabinet to the floor or anchor it on the wall.
The voltage feeds must not be overloaded. Adjust the cabling and
the external overcharge protection to correspond with the
electrical data indicated on the type label.
The type label is located on right side of the unit.
KISS 4U - User's Manual (V1.10)
Assembly, Disassembly
31
Advertisement
Table of Contents
