Table of Contents
Advertisement
Product Description
Additional Interfaces in Configuration with SBC-Board
Serial Interfaces (COM1, COM2)
Depending on the installed SBC-board on the rear side of the system can be
available additional interfaces. These connections are available as 9-pin D-SUB
plug and allow you to connect serial peripherals. These additional interfaces are
configured as RS232.
A detailed description of the SBC ports (for your system
configuration) can be found in the manual of the equipped SBC-
board.
You can download the relevant board manual for your system
configuration from our web site at
the board name. Refer to the "Configuration Guide" on our web
site.
Power Supply Unit
The power supply unit (PSU) is placed on the rear side of the unit.
The KISS 4U Platform can optional be equipped with an AC wide rage PSU, a
redundant AC wide rage PSU or with a +24V DC PSU.
For information about the integrated power supply unit (PSU) and the supply
voltage of your system, refer to the type label attached on the right side of the
unit.
Fig. 14: Detail - Wide
Range PSU
300W (AC)
24
Fig. 14a: Detail -
Wide Range PSU
460W (AC)
www.kontron.com
Fig. 14b: Detail -
redundant Wide
Range PSU (AC)
KISS - User's Manual (V1.10)
by selecting
Fig. 14c: Detail -
+24V DC PSU
Advertisement
Table of Contents
