Table of Contents
Advertisement
Assembly, Disassembly
Attaching the Rubber Feet
The rubber feet can be used for the desktop version of the system. Please follow
these steps to attach the rubber feet to the bottom side of the chassis:
Before attempting to mount the rubber feet, the system must be
powered-down and the power cord has to be disconnected from the
mains supply.
1. Turn your system off and disconnect it from the mains supply.
2. Make sure that all cards are secured into unit and that the system cover is
installed and secured.
3. Turn the system upside down.
4. Remove the protect foil from the delivered self adhesive rubber feet.
5. Attach the self adhesive rubber feet to the bottom side of the chassis.
Removing the Drive Locking Screws
Before you start-up the system for the first time and before mounting/mounting
into an industrial cabinet, open the system as described in the "Accessing Internal
Components" section and remove the drive locking screws (for rackmount and
desktop version only).
Fig. 16: KISS 4U-Drive cage with drive locking screws
KISS 4U - User's Manual (V1.10)
2
1
Assembly, Disassembly
1 Drive cage
2 Drive locking screws
27
Advertisement
Table of Contents
