Kontron Embedded Computers KISS 4U User Manual page 42

Maintenance and Prevention
6. After cleaning and drying the filter mat, replace it into the filter mat holder.
Replace the filter mat holder to the front side of the chassis (see Fig. 26,
pos. 3 and Fig. 26a, pos. 4).
7. Tighten the screw to secure the filter mat holder to the chassis.
When inserting the filter mat, ensure that the denser side of the mat
is facing the fans.
Defective components may be replaced only by Kontron original
spare parts.
1
2
3
Fig. 26: Location for filter mat holder
4
Fig. 26a: Filter mat holder with filter mat
40
part number of the filter mat: 0-0084-2953
5
6
Legend for figures: 26, 26a and 26b:
1 Threaded M4 metric stud
2 Air intake openings
3 Centering holes for the filter mat
holder
4 Locking tabs
5 Inserted filter mat
6 Fastening screw of the filter mat
holder
7 Filter mat holder
4
Fig. 26b: Filter mat holder without filter mat
KISS - User's Manual (V1.10)
7
6