Table of Contents
Advertisement
Installation Instructions
Installation Instructions
Expansion card installation should be performed before installing
the V Box Express system into an industrial cabinet or into a
control panel. Refer to the chapter "Accessing Internal
Components".
Leave sufficient space at the interface side for connecting the
peripheral devices.
Important Instructions!
If you mount the V Box Express into an industrial cabinet, it is
advisable to use two people for the mounting, because the system
weighs approx. 11 kg (approx. 24,25 lbs).
Ensure there is sufficient air circulation around the device when
installing the V Box Express. The openings for air intake and
exhaust on the device must not be covered.
Leave at least 5 cm (approx. 2".) of free space around the PC unit
to prevent the device from possibly overheating!
The voltage feeds must not be overloaded. Adjust the cabling and
the external overcharge protection to correspond with the
electrical data indicated on the type label.
The type label is located on the rear right hand side of the
system.
Mechanical Drawings for V Box Express on the web page www.kontron.com.
26
V Box Express – User' Manual
Advertisement
Table of Contents
