Table of Contents
Advertisement
Product Description
The system can be equipped with up to five front accessible drive bays (two 3.5"
and three 5.25" bays) and one internal drive bay (1x 3.5").
The operating controls of the KISS 4U-Platform are located behind the front
access door and include an "ATX-power button" and a "Reset-button" in the
standard configuration.
LED-indicators are located on the front side; for the standard version these
include the "power-LED" and "hard disk activity-LED".
Two of the system fans are installed at the front side of the unit. These are
attached to the system by means of a fan slide-in module. The fan slide-in module
simplifies the installation and removal of these components, including during
operation.
The washable filter mat, which protects your system against dust and dirt, is
located behind the air grilles of the front access door. The outside accessible filter
mat is changeable while the KISS 4U-Platform is powered-up.
The type label is attached to the right side of the unit.
12
Fig 5: KISS 4U-Platform
Ensure the proper operating position for the KISS 4U
systems:
❏ horizontal position for rack and desktop version
❏ vertical position for the tower version
When switching on the system, make sure that the air intake
and exhaust openings are not obstructed by objects.
For rack and desktop version only:
Before putting the system into operation for the first time
(before mounting / installation into an industrial cabinet), you
have to open the unit as described in the "Accessing Internal
Components" section in order to remove the drive locking
screws (fig. 6, 6a, 7, 7a pos. 13).
KISS - User's Manual (V1.10)
Advertisement
Table of Contents
