Advertisement
Tank and the Filler Neck to the top. The two Line Connectors can also be added to the Main Tank.
See the Plan Sheet for exact locations of these components.
Seat Belts:
There are four (4) Seat belts – 2 Upper; 2 Lower and each belt are comprised of two (2) Straps. The
supplied leather strip is too thick to work in scale and must first be skived to work in scale. Skiving is the
removal of the underside leather from the finished surface and this is done very carefully with a very
sharp blade and a slicing action and be careful not to cut through the finished surface. Doing this can
be a bit of a challenge but keep in mind only about 2 inch straps are needed, not one continuous piece.
Eight (8) 2 inch straps in total will be needed.
The seat belt hardware Slides (4) and Fasteners (4) are Aluminum photoetched parts. Great care must
be taken when removing from the carrier sheet and working with them.
26
Advertisement
