Table of Contents
Advertisement
1. Power supply
(1) Use only with a 24V AC power supply marked class 2 or +12V DC regulated power supply
marked class 2.
(2) To prevent fire or electrical shock, UL listed class 2 wiring should be used for the 12VDC or
24VAC input terminal.
(3) Be sure to connect each lead to the appropriate terminal. Wrong connection may cause
malfunction and/or damage to the video camera.
2. Operating and storage locations
(1) Do not attempt to aim the camera at the sun or other extremely bright objects that cause
smear to appear irrespective of whether the camera is operating or not. This can damage
the CCD(Charge Coupled Device).
(2) Do not place the camera in the following locations.
a) Locations subjected to extremely high or low temperatures.
(operating temperature range : -10°C to +50°C {14°F to 122°F})
(storage temperature range : -20°C to +60°C {-4°F to 140°F})
b) Locations subjected to high levels of humidity and dust.
(operating humidity range:max 85% {no condensation})
(storage humidity range : max 85% {no condensation})
c) Locations where there are large amounts of water vapour and steam
d) Ensure the location selected is sufficiently strong enough to support the weight of the camera
and is free from vibration.
(3) When this camera is installed near equipment, like a wireless communication device, that
emits a strong electromagnetic field, some irregularity such as noise on the monitor screen
may happen.
(4) Be sure to use screws suitable for the type of material to which the camera is being mounted.
3. Handling of the unit
Do not allow the camera to be subjected to strong impacts or shocks. The camera could be
damaged by improper handling or storage.
- Never attempt to disassemble or modify the camera.
- If an abnormality should occur, immediately turn off the power and consult your dealer.
The CE Marking is a Directive Conformity mark of the European Union (EU).
EG-3
Advertisement
Table of Contents
