Table of Contents
Advertisement
4) FOCUS:
a) Select "FOCUS" in Main Menu by pushing "Enter" button.
b) Select "AF, FAR/NEAR, DIRECT, ONE-PUSH, INFINITY".
AF mode:
(Auto Focus)
FAR/NEAR:
Focus Speed: a) Select "FAR/NEAR" by pushing "Enter" button, and "SPEED" is blinking.
DIRECT:
ONE-PUSH: One-Push AF button.
INFINITY:
SENSE:
TELE/WIDE: setting by TELE/WIDE
DIRECT:
E.ZOOM:
SPEED:
TELE/WIDE: TELE/WIDE setup
POSITION:
a) Push "Enter", and select "SENSE(AF Sensitivity)" to High or Low by "UP"
or "DOWN" button, and push "Enter" to set.
a) Select "FAR/NEAR" by pushing "Enter" button.
b)Push "Enter" again and move the cursor down to "FAR".
c) Push "Enter" again. Then, "FAR" is blinking, and select "FAR" or "NEAR"
by pushing "UP" or "DOWN" button.
d)Push "Enter" to start Focus movement, and push "Enter" again to stop.
b)Push "Enter", and select Speed between "0" (slowest) to "7"(fastest) by
pushing "UP" or "DOWN" button.
c) Push "Enter" to set.
a) Select "DIRECT".
b)You can set the focus position by Hexadecimal number.
Set to "Infinity" focus."
Select Sensitivity between HIGH/LOW. This can be controlled only during
AF mode.
AF:
FAR/NEAR: setting by FAR/NEAR
DIRECT:
ONE-PUSH: one-push Auto Focus
INFINITY:
SPEED:
SENSE:
FAR/NEAR: FAR/NEAR setting
POSITION:
setting by input the number
Digital Zoom ON (x 4, x 8) / OFF setup
speed of TELE/WIDE setup
input a hexadecimal number (on DIRECT)
Auto Focus
setting by input a numerical number
forced infinity
speed of FAR/NEAR
sensitivity of Auto Focus
input a hexadecimal number (on DIRECT)
EG-7
Advertisement
Table of Contents
