Lynx Enduro 400 F Owner's Manual page 178

1. Adjustment screw
2. Loosen lock nut (some models only)
3. Loosen screw
Alignment
Track tension and alignment are inter-related. Do not adjust one without the other.
WARNING!
Before checking track alignment, ensure that the track is free of all particles which could
be thrown out while track is rotating. Keep hands, tools, feet and clothing clear of track.
Ensure no one is standing in close proximity to the snowmobile.
Start the engine and accelerate slightly so that track barely turns. This must be done in a
short period of time
(15 to 20 sesonds). Check that the track is well centered; equal distance on both sides
between edges of track guides and slider shoes.
1. Guides
2. Slider shoes
3. Equal distance
To correct, stop the engine: Loosen the lock nuts (some models only) and tighten the ad-
justment screw on side where the slider shoe is the farthest from the track insert guides.
1. Guides
2. Slider shoes
3. Tighten on this side
OPERATOR'S GUIDE 53