Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Lynx Manuals
  4. Snowmobiles
  5. RADIEN DEEP SNOW 2022 Series
  6. Operator's manual

Lynx RADIEN DEEP SNOW 2022 Series Operator's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
RADIEN DEEP SNOW
OPERATOR'S
GUIDE
Includes Safety, Use and
Maintenance Information
Read this guide thoroughly. It contains important safety information.
Minimum recommended operator age: 16 years old. Keep this opera-
tor's guide in the vehicle.
520002599_rev1
WARNING
Original Instructions
Series

Advertisement

loading

Related Manuals for Lynx RADIEN DEEP SNOW 2022 Series

Summary of Contents for Lynx RADIEN DEEP SNOW 2022 Series

  • Page 1 RADIEN DEEP SNOW Series OPERATOR’S GUIDE Includes Safety, Use and Maintenance Information WARNING Read this guide thoroughly. It contains important safety information. Minimum recommended operator age: 16 years old. Keep this opera- tor’s guide in the vehicle. 520002599_rev1 Original Instructions...
  • Page 2 TM® This is a non-exhaustive list of trademarks that are the prop- erty of Bombardier Recreational Products Inc. or its affiliates: D.E.S.S. E-TEC ® LYNX RAVE ® ROTAX ® All rights reserved. No parts of this Manual may be re- produced in any form without the prior written permis- sion of Bombardier Recreational Products Inc.
  • Page 3 Dieses Handbuch ist möglicherweise in Ihrer Landessprache Deutsch verfügbar. Bitte wenden Sie sich an Ihren Händler oder besuchen Sie: www.operatorsguides.brp.com This guide may be available in your language. Check with your dealer or English go to: www.operatorsguides.brp.com Es posible que este manual esté disponible en su idioma. Consulte a su Español distribuidor o visite: www.operatorsguides.brp.com Ce guide peut être disponible dans votre langue.
  • Page 4 OPERATOR’S GUIDE P P a a c c k k a a g g e e E E n n g g i i n n e e M M o o d d e e l l DS 3900 BoonDocker 850 E-TEC DS 4100...
  • Page 5 T T A A B B L L E E O O F F C C O O N N T T E E N N T T S S G G E E N N E E R R A A L L I I N N F F O O R R M M A A T T I I O O N N G G E E N N E E R R A A L L I I N N F F O O R R M M A A T T I I O O N N .
  • Page 6 TABLE OF CONTENTS Emergency Engine Stop Switch ......72 S S E E C C O O N N D D A A R R Y Y C C O O N N T T R R O O L L S S ..............7 7 5 5 Engine Cut-off Switch ........75 Console Switches ..........77 SHOT/Electric Start/Electronic Reverse (RER)
  • Page 7 TABLE OF CONTENTS R R I I D D I I N N G G C C O O N N D D I I T T I I O O N N S S A A N N D D Y Y O O U U R R S S N N O O W W M M O O B B I I L L E E .
  • Page 8 TABLE OF CONTENTS T T E E C C H H N N I I C C A A L L I I N N F F O O R R M M A A T T I I O O N N V V E E H H I I C C L L E E I I D D E E N N T T I I F F I I C C A A T T I I O O N N .
  • Page 9 TABLE OF CONTENTS CONSUMER ASSISTANCE ......252 U U S S E E P P A A E E M M I I S S S S I I O O N N - - R R E E L L A A T T E E D D W W A A R R R R A A N N T T Y Y ... . 2 2 5 5 3 3 Emission-Related Warranty Period ....
  • Page 10 TABLE OF CONTENTS This page is intention- ally blank...
  • Page 11 G G E E N N E E R R A A L L I I N N F F O O R R M M A A T T I I O O N N...
  • Page 12 G G E E N N E E R R A A L L I I N N F F O O R R M M A A T T I I O O N N Congratulations on your purchase of a new BRP snow- mobile.
  • Page 13 GENERAL INFORMATION The proper functioning of a snowmobile depends in part on the surface on which it is driven. Refer to riding con- ditions and your snowmobile for details. S S a a f f e e t t y y M M e e s s s s a a g g e e s s This operator’s guide utilizes the following symbols and words to emphasize particular information: The safety alert symbol...
  • Page 14 GENERAL INFORMATION – P P a a s s s s e e n n g g e e r r : refers to a person sitting behind the operator. – 1 1 - - U U P P : refers to a model designed for an operator only.
  • Page 15 S S A A F F E E T T Y Y I I N N F F O O R R M M A A T T I I O O N N SAFETY INFORMATION...
  • Page 16 G G E E N N E E R R A A L L P P R R E E C C A A U U T T I I O O N N S S A A v v o o i i d d C C a a r r b b o o n n M M o o n n o o x x i i d d e e P P o o i i s s o o n n i i n n g g All engine exhaust contains carbon monoxide, a deadly gas.
  • Page 17 GENERAL PRECAUTIONS Gasoline is poisonous and can cause injury or death. – Never siphon gasoline by mouth. – If you swallow gasoline, get any in your eye or inhale gasoline vapor, see your doctor immediately. If gasoline spills on you, wash with soap and water and change your clothes.
  • Page 18 S S P P E E C C I I A A L L S S A A F F E E T T Y Y M M E E S S S S A A G G E E S S S S E E V V E E R R E E I I N N J J U U R R Y Y O O R R D D E E A A T T H H can result if you do not follow these instructions: –...
  • Page 19 SPECIAL SAFETY MESSAGES training course is offered in your area, have him enroll. – The performance of some snowmobiles may signifi- cantly exceed that of other snowmobiles you have operated. Therefore, use by novice or inexperienced operators is not recommended. –...
  • Page 20 SPECIAL SAFETY MESSAGES – Speeding can be fatal. In many cases, you cannot react or respond quickly enough to the unexpected. Always ride at a speed which is suitable to the trail, weather conditions and your own ability. Know your local rules.
  • Page 21 SPECIAL SAFETY MESSAGES – Fences represent a very serious threat for both you and your snowmobile. Give a wide berth to tele- phone poles or posts. – Hidden wires unseen from a distance can cause serious accidents. – Always wear an approved safety helmet, eye protec- tion and a face shield.
  • Page 22 SPECIAL SAFETY MESSAGES snowmobile. In addition, when “gunning” the throttle, the vehicle digs into and leaves an irregular snow surface for others. – Safaris are both fun and enjoyable but don't show off or overtake others in the group. A less experienced operator might try to do the same as you and fail.
  • Page 23 SPECIAL SAFETY MESSAGES – You may stud the track on this vehicle model. How- ever, you MUST only use the BRP approved type stud for use on Ski-Doo snowmobiles. DO NOT EVER use conventional studs because the track thickness is thinner than our standard tracks. The stud could tear off of track and separate from vehicle.
  • Page 24 R R I I D D I I N N G G T T H H E E V V E E H H I I C C L L E E Each operator has a responsibility to ensure the safety of other recreationists or bystanders.
  • Page 25 RIDING THE VEHICLE B B e e f f o o r r e e S S t t a a r r t t i i n n g g t t h h e e E E n n g g i i n n e e 1.
  • Page 26 RIDING THE VEHICLE 2. Check the engine cut-off switch (by pulling tether cord cap) and emergency engine stop switch operation. 3. Release parking brake. 4. Refer to Vehicle warm up and follow instructions. P P r r e e - - R R i i d d e e C C h h e e c c k k L L i i s s t t I I T T E E M M O O P P E E R R A A T T I I O O N N ✔...
  • Page 27 RIDING THE VEHICLE I I T T E E M M O O P P E E R R A A T T I I O O N N ✔ ✔ THROTTLE Check for proper operation. LEVER Check for proper operation. BRAKE LEVER PARKING Check for proper operation.
  • Page 28 RIDING THE VEHICLE Wear an approved helmet at all times for safety and comfort. They provide both warmth and reduce injury. A stocking type cap, balaclava and face mask should al- ways be carried or worn. Goggles or a face shield that attach to the helmet are indispensable.
  • Page 29 RIDING THE VEHICLE Avalanche beacon* *When riding in an area with avalanche risk R R i i d d e e r r P P o o s s i i t t i i o o n n ( ( F F o o r r w w a a r r d d O O p p e e r r a a t t i i o o n n ) ) Your riding position and balance are the two basic prin- ciples of making your snowmobile go where you want it to.
  • Page 30 RIDING THE VEHICLE P P o o s s t t i i n n g g A semi-sitting position with the body off the seat and the feet under the body in a sort of squatting posture, thus allowing the legs to absorb the shocks when traveling over uneven terrain.
  • Page 31 RIDING THE VEHICLE K K n n e e e e l l i i n n g g This position is achieved by placing one foot firmly on the running board and the opposite knee on the seat. Avoid abrupt stops. SAFETY INFORMATION...
  • Page 32 RIDING THE VEHICLE S S t t a a n n d d i i n n g g Place both feet on the running boards. Knees should be flexed to absorb the shock from surface bumps. This is an effective position to see better and to shift weight as conditions dictate.
  • Page 33 RIDING THE VEHICLE R R i i d d e e r r P P o o s s i i t t i i o o n n ( ( R R e e v v e e r r s s e e O O p p e e r r a a t t i i o o n n ) ) We recommend sitting on your snowmobile when oper- ating in reverse.
  • Page 34 RIDING THE VEHICLE W W A A R R N N I I N N G G A A n n y y p p a a s s s s e e n n g g e e r r m m u u s s t t b b e e a a b b l l e e t t o o f f i i r r m m l l y y l l a a y y h h i i s s f f e e e e t t o o n n t t h h e e f f o o o o t t r r e e s s t t s s a a n n d d k k e e e e p p h h i i s s h h a a n n d d s s o o n n t t h h e e h h a a n n d d - - h h o o l l d d s s o o r r s s e e a a t t s s t t r r a a p p a a t t a a l l l l t t i i m m e e s s w w h h e e n n s s e e a a t t e e d d .
  • Page 35 RIDING THE VEHICLE passenger-less. Remind your passenger to lean into the turn with you, without causing the vehicle to topple. Be extremely careful, go more slowly and check the pas- senger frequently. W W A A R R N N I I N N G G W W h h e e n n r r i i d d i i n n g g w w i i t t h h a a p p a a s s s s e e n n g g e e r r : : –...
  • Page 36 RIDING THE VEHICLE U U n n g g r r o o o o m m e e d d T T r r a a i i l l Unless there has been a fresh snowfall you can expect “washboard”...
  • Page 37 RIDING THE VEHICLE outlets, springs, fast moving currents or other hazards. Never attempt to operate your snowmobile on ice that may be too weak to support you and the vehicle. Oper- ating a snowmobile on ice or icy surfaces can be very dangerous if you do not observe certain precautions.
  • Page 38 RIDING THE VEHICLE crest. If you cannot proceed further, don't spin your track. Apply the parking brake, turn the engine off, free the skis by pulling them out and downhill, place the rear of the snowmobile uphill, restart the engine, release the parking brake and ease it out with slow even throttle pressure.
  • Page 39 RIDING THE VEHICLE restricted to lower angle slopes. Wind formed cornices should be avoided. Staying off unstable conditions is the key to safe mountain riding. Probably most important is to be aware of the conditions and dangers on a daily ba- sis when in the mountains.
  • Page 40 RIDING THE VEHICLE U U n n f f a a m m i i l l i i a a r r T T e e r r r r i i t t o o r r y y Whenever you enter an area that is new to you, drive with extreme caution.
  • Page 41 RIDING THE VEHICLE O O b b s s t t a a c c l l e e s s a a n n d d J J u u m m p p i i n n g g Unplanned jumps of snowdrifts, snowplow ridges, cul- verts or indistinguishable objects can be dangerous.
  • Page 42 RIDING THE VEHICLE R R o o a a d d C C r r o o s s s s i i n n g g In some cases, you will be approaching the road from a ditch or snowbank. Choose a place where you know you can climb without difficulty.
  • Page 43 RIDING THE VEHICLE N N i i g g h h t t R R i i d d e e s s The amount of natural and artificial light at a given time can effect your ability to see or to be seen. Nighttime snowmobiling is delightful.
  • Page 44 RIDING THE VEHICLE position so it forms a right angle at the elbow. Every snowmobiler should relay any signal to the ones behind. T T r r a a i i l l S S t t o o p p s s Whenever possible, pull off the trail when you stop.
  • Page 45 RIDING THE VEHICLE number of people using these recreational parks in- creases, so does the potential for damage to the envi- ronment. Abuse of land, facilities and resources inevitably leads to restrictions and closures of both pri- vate and public land. In essence, the greatest threat to our sport, is all around us.
  • Page 46 RIDING THE VEHICLE B B e e c c o o m m e e i i n n f f o o r r m m e e d d . Obtain maps, regulations and other information from the Forest Service or from other public land agencies.
  • Page 47 You don't have to leave big tracks or careen through a virgin forest to show you can ride. So whether you're driving a high performance Lynx snowmobile or any other make or model, show you know what you're doing. Show you know how to send snow flying and...
  • Page 48 T T R R A A C C T T I I O O N N E E N N H H A A N N C C I I N N G G P P R R O O D D U U C C T T S S I I m m p p o o r r t t a a n n t t -DEEP SNOW SERIES snowmobiles are not meant to be used with any type of traction enhancing...
  • Page 49 TRACTION ENHANCING PRODUCTS on your personal preferences, your riding style, and how your suspension is adjusted. W W A A R R N N I I N N G G I I f f t t h h e e f f r r o o n n t t a a n n d d r r e e a a r r o o f f t t h h e e s s n n o o w w m m o o b b i i l l e e a a r r e e o o u u t t o o f f b b a a l l a a n n c c e e d d u u e e t t o o a a n n i i n n c c o o r r r r e e c c t t c c o o m m b b i i n n a a t t i i o o n n o o f f t t r r a a c c t t i i o o n n e e n n h h a a n n c c i i n n g g p p r r o o d d u u c c t t s s , , t t h h e e s s n n o o w w m m o o b b i i l l e e m m a a y y t t e e n n d d t t o o o o v v e e r r s s t t e e e e r r o o r r u u n n d d e e r r s s t t e e e e r r , , w w h h i i c c h h c c o o u u l l d d l l e e a a d d t t o o a a l l o o s s s s...
  • Page 50 S S A A F F E E T T Y Y I I N N F F O O R R M M A A T T I I O O N N O O N N T T H H E E V V E E H H I I C C L L E E H H a a n n g g T T a a g g ( ( s s ) ) T T Y Y P P I I C C A A L L...
  • Page 51 SAFETY INFORMATION ON THE VEHICLE SAFETY INFORMATION...
  • Page 52 SAFETY INFORMATION ON THE VEHICLE SAFETY INFORMATION...
  • Page 53 SAFETY INFORMATION ON THE VEHICLE . Operating, servicing and WARNING maintaining an off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
  • Page 54 SAFETY INFORMATION ON THE VEHICLE V V e e h h i i c c l l e e S S a a f f e e t t y y L L a a b b e e l l s s These labels are affixed to the vehicle for the safety of the operator, passenger or bystanders.
  • Page 55 SAFETY INFORMATION ON THE VEHICLE Always electrically disconnect both fuel injectors prior to testing for ignition spark. Otherwise, fuel vapors may ignite in presence of a spark creating a fire hazard. 516007661 L L A A B B E E L L 1 1 SAFETY INFORMATION...
  • Page 56 SAFETY INFORMATION ON THE VEHICLE L L A A B B E E L L 2 2 SAFETY INFORMATION...
  • Page 57 SAFETY INFORMATION ON THE VEHICLE L L A A B B E E L L 3 3 L L A A B B E E L L 4 4 SAFETY INFORMATION...
  • Page 58 SAFETY INFORMATION ON THE VEHICLE L L A A B B E E L L 5 5 SAFETY INFORMATION...
  • Page 59 SAFETY INFORMATION ON THE VEHICLE L L A A B B E E L L 6 6 SAFETY INFORMATION...
  • Page 60 SAFETY INFORMATION ON THE VEHICLE L L A A B B E E L L 7 7 SAFETY INFORMATION...
  • Page 61 SAFETY INFORMATION ON THE VEHICLE L L A A B B E E L L 8 8 L L A A B B E E L L 9 9 - - O O N N A A P P P P L L I I C C A A B B L L E E S S H H O O C C K K A A B B S S O O R R B B E E R R S S L L A A B B E E L L 1 1 0 0 SAFETY INFORMATION...
  • Page 62 SAFETY INFORMATION ON THE VEHICLE L L A A B B E E L L 1 1 1 1 L L A A B B E E L L 1 1 2 2 SAFETY INFORMATION...
  • Page 63 SAFETY INFORMATION ON THE VEHICLE L L A A B B E E L L 1 1 3 3 SAFETY INFORMATION...
  • Page 64 SAFETY INFORMATION ON THE VEHICLE T T e e c c h h n n i i c c a a l l I I n n f f o o r r m m a a t t i i o o n n L L a a b b e e l l s s T T Y Y P P I I C C A A L L The engine of this snowmobile has been developed and validated using the BRP XPS...
  • Page 65 SAFETY INFORMATION ON THE VEHICLE – Install Pulley Expander and Headlight adjustment tool 2nd. (illustrated Blue on label) – Refer to your operator's guide. 516009955 L L A A B B E E L L 2 2 OCTANE O O N N F F U U E E L L C C A A P P - - O O N N 6 6 0 0 0 0 R R E E - - T T E E C C A A N N D D 8 8 5 5 0 0 E E - - T T E E C C E E N N G G I I N N E E I I N N C C O O U U N N T T R R I I E E S S U U S S I I N N G G P P U U M M P P P P O O S S T T E E D D A A K K I I ( ( R R O O N N + + M M O O N N ) ) / / 2 2 O O C C - - T T A A N N E E R R A A T T I I N N G G S S SAFETY INFORMATION...
  • Page 66 R R E E P P O O R R T T I I N N G G S S A A F F E E T T Y Y D D E E F F E E C C T T S S In Canada, if you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform Transport Canada...
  • Page 67 V V E E H H I I C C L L E E I I N N F F O O R R M M A A T T I I O O N N...
  • Page 68 P P R R I I M M A A R R Y Y C C O O N N T T R R O O L L S S Vehicle safety labels are not shown on illustrations. For information on vehicle safety labels, refer to SAFETY INFORMATION ON THE VEHICLE .
  • Page 69 PRIMARY CONTROLS T T h h r r o o t t t t l l e e L L e e v v e e r r Throttle lever is located on the RH side of handlebar. Designed to be thumb activated. When squeezed, it in- creases the engine speed.
  • Page 70 PRIMARY CONTROLS W W A A R R N N I I N N G G T T e e s s t t t t h h e e t t h h r r o o t t t t l l e e l l e e v v e e r r o o p p e e r r a a t t i i o o n n e e a a c c h h t t i i m m e e b b e e f f o o r r e e s s t t a a r r t t i i n n g g t t h h e e e e n n g g i i n n e e .
  • Page 71 PRIMARY CONTROLS T T Y Y P P I I C C A A L L 1. Brake lever 2. Apply brake P P a a r r k k i i n n g g B B r r a a k k e e L L e e v v e e r r Parking brake lever is located on the LH side of handlebar.
  • Page 72 PRIMARY CONTROLS T T Y Y P P I I C C A A L L 1. Parking brake lever W W A A R R N N I I N N G G M M a a k k e e s s u u r r e e p p a a r r k k i i n n g g b b r r a a k k e e i i s s f f u u l l l l y y d d i i s s e e n n g g a a g g e e d d b b e e - - f f o o r r e e o o p p e e r r a a t t i i n n g g t t h h e e s s n n o o w w m m o o b b i i l l e e .
  • Page 73 PRIMARY CONTROLS T T Y Y P P I I C C A A L L — — E E N N G G A A G G E E M M E E C C H H A A N N I I S S M M 1.
  • Page 74 PRIMARY CONTROLS E E m m e e r r g g e e n n c c y y E E n n g g i i n n e e S S t t o o p p S S w w i i t t c c h h The emergency engine stop switch is located on the RH side of handlebar.
  • Page 75 PRIMARY CONTROLS O O F F F F P P O O S S I I T T I I O O N N To allow engine starting, the switch must be in the ON position (UP).
  • Page 76 PRIMARY CONTROLS O O N N P P O O S S I I T T I I O O N N All operators of the snowmobile should familiarize them- selves with the function of the emergency engine stop switch by using it several times on first outing and when- ever stopping the engine thereafter.
  • Page 77 S S E E C C O O N N D D A A R R Y Y C C O O N N T T R R O O L L S S Some features may not apply to your model or could be optional.
  • Page 78 SECONDARY CONTROLS The engine cut-off switch (tether cord) is located on the console. The tether cord cap must be securely snapped on the engine cut-off switch to allow vehicle operation. Pulling the tether cord cap from the switch shuts the en- gine off.
  • Page 79 SECONDARY CONTROLS D D . . E E . . S S . . S S . . F F l l e e x x i i b b i i l l i i t t y y The D.E.S.S.
  • Page 80 SECONDARY CONTROLS S S W W I I T T C C H H O O N N C C O O N N S S O O L L E E 1. High beam 2. Low beam H H e e a a t t e e d d T T h h r r o o t t t t l l e e L L e e v v e e r r a a n n d d G G r r i i p p s s N N O O T T E E : : Under 2000 RPM, heated grips will be limited at 50%.
  • Page 81 SECONDARY CONTROLS The switch on console controls simultaneously the han- dlebar grips and throttle lever heat intensity. The bal- ance between the temperature of the throttle lever and the grips can be adjusted. Contact an authorized Ski-- Doo dealer. Depress switch as required to select heating intensity to keep your hands at a comfortable temperature.
  • Page 82 SECONDARY CONTROLS Heated grips will be in OFF position when there are no bars displayed on the gauge. When the switch is released, display will return to fuel level. H H E E A A T T E E D D T T H H R R O O T T T T L L E E L L E E V V E E R R D D I I S S P P L L A A Y Y Heated throttle lever will be in OFF position when there are no bars displayed on the gauge.
  • Page 83 SECONDARY CONTROLS On SHOT and electric start models, press to start engine. Once engine is started, press to engage the electronic reverse. Refer to BASIC PROCEDURES for instructions on how to use: – SHOT system (if equipped) – Electric starter (if equipped) –...
  • Page 84 E E Q Q U U I I P P M M E E N N T T S S Some features may not apply to your model or could be optional. S S t t o o r r a a g g e e C C o o m m p p a a r r t t m m e e n n t t A storage compartment is located at the front of the ve- hicle, above the gauge.
  • Page 85 EQUIPMENTS S S e e a a t t R R e e m m o o v v i i n n g g t t h h e e S S e e a a t t ( ( t t a a b b l l o o c c k k ) ) From between the fuel tank and the seat front end, pull the locking tab upwards.
  • Page 86 EQUIPMENTS W W A A R R N N I I N N G G M M a a k k e e s s u u r r e e s s e e a a t t i i s s s s e e c c u u r r e e l l y y l l a a t t c c h h e e d d b b e e f f o o r r e e r r i i d d i i n n g g . .
  • Page 87 EQUIPMENTS F F r r o o n n t t a a n n d d R R e e a a r r B B u u m m p p e e r r s s To be used whenever snowmobile requires manual lifting.
  • Page 88 EQUIPMENTS 1. Rear bumper N N O O T T I I C C E E D D o o n n o o t t u u s s e e s s k k i i s s t t o o p p u u l l l l o o r r l l i i f f t t s s n n o o w w m m o o b b i i l l e e . . D D r r i i v v e e B B e e l l t t G G u u a a r r d d R R e e m m o o v v i i n n g g t t h h e e D D r r i i v v e e B B e e l l t t G G u u a a r r d d W W A A R R N N I I N N G G...
  • Page 89 EQUIPMENTS N N O O T T E E : : Belt guard is purposely made slightly oversize to main- tain tension on its pins and retainers preventing undue noise and vibration. It is important that this tension be maintained when reinstalling. Remove tether cord cap from engine cut-off switch.
  • Page 90 EQUIPMENTS Push drive belt guard toward engine then toward front of vehicle.
  • Page 91 EQUIPMENTS Position the rear portion of the belt guard over the re- tainer and secure it using the retaining pin.
  • Page 92 EQUIPMENTS T T o o o o l l s s A part of the drive belt guard is designed to hold the tools allowing for basic maintenance. The tools are supplied with the vehicle. They should al- ways be installed in their proper location and orientation.
  • Page 93 EQUIPMENTS T T Y Y P P I I C C A A L L - - D D R R I I V V E E B B E E L L T T G G U U A A R R D D T T O O O O L L S S L L O O C C A A T T I I O O N N 1.
  • Page 94 EQUIPMENTS S S U U S S P P E E N N S S I I O O N N A A D D J J U U S S T T M M E E N N T T T T O O O O L L 2.
  • Page 95 EQUIPMENTS 4. Rotate and clip long end in place. S S p p a a r r e e D D r r i i v v e e B B e e l l t t H H o o l l d d e e r r A spare drive belt can be stored in a holder located on the drive belt guard.
  • Page 96 EQUIPMENTS T T Y Y P P I I C C A A L L 1. Drive belt guard 2. Slot Secure in place by sliding it behind the tabs. T T Y Y P P I I C C A A L L...
  • Page 97 EQUIPMENTS U U p p p p e e r r B B o o d d y y M M o o d d u u l l e e U U p p p p e e r r B B o o d d y y M M o o d d u u l l e e R R e e m m o o v v a a l l 1.
  • Page 98 EQUIPMENTS T T Y Y P P I I C C A A L L 4. Lift the front of the gauge support, then slide it for- ward to remove it.
  • Page 99 EQUIPMENTS 5. Disconnect gauge connector and remove support . 6. Lift storage compartement and disconnect 12V power outlet connectors before removing the storage compartment (if equipped). 7. Disconnect the MAPTS and headlight connectors.
  • Page 100 EQUIPMENTS T T Y Y P P I I C C A A L L 8. Remove both side panels. Refer to SIDE PANELS in this section. 9. Loosen the air intake duct clamp. 10. Remove the upper body module retaining screws on both sides.
  • Page 101 EQUIPMENTS 11. Remove the upper body module. 1. Grab the upper body module in the gauge sup- port section. 2. Pull the module forward. 3. Remove the module from the vehicle. U U p p p p e e r r B B o o d d y y M M o o d d u u l l e e I I n n s s t t a a l l l l a a t t i i o o n n 1.
  • Page 102 EQUIPMENTS 6. Connect the manifold air pressure and temperature sensor (MAPTS) connector. 7. Connect the headlight connectors. 8. Install the storage compartment but leave the cover open. 9. Install gauge, secure with the screws. t t i i g g h h t t e e n n i i n n g g T T o o r r q q u u e e 2.3 ±...
  • Page 103 EQUIPMENTS T T Y Y P P I I C C A A L L 1. Unhook 2. Turn T T Y Y P P I I C C A A L L...
  • Page 104 EQUIPMENTS When closing panel, make sure latches are locked securely. S S i i d d e e P P a a n n e e l l s s R R e e m m o o v v a a l l Open side panel.
  • Page 105 EQUIPMENTS T T Y Y P P I I C C A A L L W W A A R R N N I I N N G G D D o o n n o o t t u u s s e e w w h h i i l l e e r r i i d d i i n n g g a a t t s s p p e e e e d d . . S S t t e e e e r r i i n n g g c c o o n n t t r r o o l l i i s s h h i i g g h h l l y y r r e e d d u u c c e e d d a a n n d d b b r r a a k k e e c c o o n n t t r r o o l l i i s s n n o o t t p p o o s s s s i i b b l l e e .
  • Page 106 EQUIPMENTS I I c c e e S S c c r r a a t t c c h h e e r r s s Some models are factory equipped with ice scratchers which provide lubrication and cooling to slides and track guides for s s h h o o r r t t r r i i d d e e s s on ice and hard packed trails.
  • Page 107 EQUIPMENTS S S n n o o w w G G u u a a r r d d ( ( D D S S T T y y p p e e , , i i f f e e q q u u i i p p p p e e d d ) ) N N O O T T I I C C E E N N e e v v e e r r r r e e m m o o v v e e t t h h e e s s n n o o w w g g u u a a r r d d .
  • Page 108 4 4 . . 5 5 ” ” D D I I G G I I T T A A L L D D I I S S P P L L A A Y Y M M u u l l t t i i f f u u n n c c t t i i o o n n D D i i s s p p l l a a y y L L o o w w e e r r D D i i s s p p l l a a y y May display the following: –...
  • Page 109 4.5” DIGITAL DISPLAY The SPEED STAT display shows the maximum and the averaged speed. Hold LOWER button for 3 seconds to reset. When the SPEED display is chosen, the RPM is shown in the TRIP display. L L e e f f t t L L a a t t e e r r a a l l D D i i s s p p l l a a y y The left lateral display includes: –...
  • Page 110 4.5” DIGITAL DISPLAY C C e e n n t t r r a a l l D D i i s s p p l l a a y y Display the RPM of the engine or the vehicle speed in Km/h or MPH.
  • Page 111 4.5” DIGITAL DISPLAY D D r r i i v v e e m m e e s s s s a a g g e e a a t t m m e e s s s s a a g g e e a a t t A A c c t t i i v v a a t t i i o o n n d d e e a a c c t t i i v v a a t t i i o o n n m m o o d d e e...
  • Page 112 4.5” DIGITAL DISPLAY N N O O T T E E : : Some warning indicators appear in the display of the multifunction gauge and function the same as an indica- tor lamp but do not display when starting the vehicle. T T e e l l l l t t a a l l e e L L i i g g h h t t s s - - L L o o w w e e r r B B a a r r L L i i g g h h t t s s D D e e s s c c r r i i p p t t i i o o n n...
  • Page 113 4.5” DIGITAL DISPLAY L L i i g g h h t t s s D D e e s s c c r r i i p p t t i i o o n n ORANGE - Low fuel level ORANGE T T u u r r n n o o n n : Malfunction of the vehicle emissions control system...
  • Page 114 4.5” DIGITAL DISPLAY S S e e t t t t i i n n g g s s S S e e t t u u p p 1. Upper button (S) 2. Lower button (M) Using LOWER button, select S S E E T T T T I I N N G G S S and hold to enter setting menu.
  • Page 115 4.5” DIGITAL DISPLAY 1. Press LOWER button to select clock display. 2. Push and hold LOWER button for 1 second. 3. Press LOWER button to select 12:00 AM PM or 24:00 time base. 4. Push and hold LOWER button to acknowledge selection.
  • Page 116 F F U U E E L L F F u u e e l l R R e e q q u u i i r r e e m m e e n n t t s s N N O O T T I I C C E E A A l l w w a a y y s s u u s s e e f f r r e e s s h h g g a a s s o o l l i i n n e e .
  • Page 117 FUEL m m i i n n . . o o c c t t a a n n e e f f u u e e l l t t y y p p e e e e n n g g i i n n e e r r a a t t i i n n g g 87 Pump Posted AKI (RON+MON)/...
  • Page 118 FUEL V V e e h h i i c c l l e e F F u u e e l l i i n n g g P P r r o o c c e e d d u u r r e e W W A A R R N N I I N N G G A A l l w w a a y y s s s s t t o o p p e e n n g g i i n n e e b b e e f f o o r r e e r r e e f f u u e e l l i i n n g g .
  • Page 119 FUEL T T Y Y P P I I C C A A L L 1. Fuel tank cap 4. Insert the spout into the filler neck. 5. Pour fuel slowly so that air can escape from the tank and prevent fuel flow back. Be careful not to spill fuel.
  • Page 120 I I N N J J E E C C T T I I O O N N O O I I L L R R e e c c o o m m m m e e n n d d e e d d I I n n j j e e c c t t i i o o n n O O i i l l Rotax engines were developed and validated using the ®...
  • Page 121 INJECTION OIL 1. Oil reservoir Marks on the tank indicates "3/8" and "1/2" of the total amount of oil. N N O O T T I I C C E E C C h h e e c c k k l l e e v v e e l l a a n n d d r r e e f f i i l l l l e e v v e e r r y y t t i i m m e e y y o o u u r r e e f f u u e e l l . . T T o o A A d d d d I I n n j j e e c c t t i i o o n n O O i i l l Remove injection oil reservoir cap.
  • Page 122 INJECTION OIL Reinstall cap. N N O O T T I I C C E E D D o o n n o o t t o o v v e e r r t t i i g g h h t t e e n n . . W W A A R R N N I I N N G G W W i i p p e e o o f f f f a a n n y y o o i i l l s s p p i i l l l l s s .
  • Page 123 B B R R E E A A K K - - I I N N P P E E R R I I O O D D O O p p e e r r a a t t i i o o n n D D u u r r i i n n g g B B r r e e a a k k - - I I n n E E n n g g i i n n e e During the break-in period: –...
  • Page 124 B B A A S S I I C C P P R R O O C C E E D D U U R R E E S S E E n n g g i i n n e e S S t t a a r r t t i i n n g g P P r r o o c c e e d d u u r r e e P P r r o o c c e e d d u u r r e e 1.
  • Page 125 BASIC PROCEDURES – Start engine manually as explained above – Let the engine run for at least 2 minutes. N N O O T T E E : : If engine temperature is below 0 °C (32 °F), it may have to run longer than 2 minutes.
  • Page 126 BASIC PROCEDURES E E m m e e r r g g e e n n c c y y S S t t a a r r t t i i n n g g The engine can be started with the emergency starter rope supplied in the storage compartment, see CON- TROLS, INSTRUMENTS AND EQUIPMENT .
  • Page 127 BASIC PROCEDURES Cross the rope on the first turn as shown. 1. Rope crossed 2. Rope to be winded 3. Rope end Wind rope two turns counterclockwise tightly around the drive pulley where shown. Pull the rope using a sharp, crisp pull so the rope comes free of the drive pulley.
  • Page 128 BASIC PROCEDURES Start engine as per usual manual starting. W W A A R R N N I I N N G G W W h h e e n n s s t t a a r r t t i i n n g g t t h h e e s s n n o o w w m m o o b b i i l l e e i i n n a a n n e e m m e e r r g g e e n n c c y y s s i i t t u u a a t t i i o o n n , , u u s s i i n n g g d d r r i i v v e e p p u u l l l l e e y y , , d d o o n n o o t t r r e e i i n n s s t t a a l l l l t t h h e e b b e e l l t t g g u u a a r r d d a a n n d d r r e e t t u u r r n n s s l l o o w w l l y y t t o o h h a a v v e e s s n n o o w w m m o o b b i i l l e e r r e e p p a a i i r r e e d d .
  • Page 129 BASIC PROCEDURES 3. Disengage parking brake. 4. Apply throttle until drive pulley engages. Drive at low speed the first two or three minutes. N N O O T T I I C C E E I I f f v v e e h h i i c c l l e e d d o o e e s s n n o o t t m m o o v v e e w w h h e e n n t t h h r r o o t t t t l l e e i i s s a a p p p p l l i i e e d d , , s s t t o o p p e e n n g g i i n n e e , , r r e e m m o o v v e e t t e e t t h h e e r r c c o o r r d d c c a a p p f f r r o o m m t t h h e e e e n n - - g g i i n n e e c c u u t t - - o o f f f f s s w w i i t t c c h h , , t t h h e e n n d d o o t t h h e e f f o o l l l l o o w w i i n n g g .
  • Page 130 BASIC PROCEDURES R R e e v v e e r r s s e e ( ( R R E E R R ) ) When the engine is running, depressing the RER button will slow down engine RPM to almost a stop and ad- vance the ignition timing to invert crankshaft rotation.
  • Page 131 BASIC PROCEDURES S S h h i i f f t t i i n n g g i i n n F F o o r r w w a a r r d d 1. Bring vehicle to a complete stop. 2.
  • Page 132 R R I I D D I I N N G G C C O O N N D D I I T T I I O O N N S S A A N N D D Y Y O O U U R R S S N N O O W W M M O O B B I I L L E E A A l l t t i i t t u u d d e e At factory, your snowmobile was calibrated to be used...
  • Page 133 RIDING CONDITIONS AND YOUR SNOWMOBILE In the event that you have to, r r e e d d u u c c e e t t h h e e s s p p e e e e d d , and minimize the distance you ride on these types of surfaces.
  • Page 134 RIDING CONDITIONS AND YOUR SNOWMOBILE M M a a x x i i m m u u m m s s u u s s t t a a i i n n e e d d T T r r a a c c k k P P r r o o f f i i l l e e H H e e i i g g h h t t S S p p e e e e d d 57 mm (2.25 in) 110 km/h (70 MPH)
  • Page 135 S S P P E E C C I I A A L L O O P P E E R R A A T T I I O O N N T T o o w w i i n n g g a a n n A A c c c c e e s s s s o o r r y y Always use a rigid tow bar to tow an accessory.
  • Page 136 SPECIAL OPERATION N N O O T T I I C C E E I I n n o o r r d d e e r r t t o o p p r r e e v v e e n n t t d d a a m m a a g g e e t t o o t t h h e e s s t t e e e e r r i i n n g g s s y y s s t t e e m m , , n n e e v v e e r r a a t t t t a a c c h h t t h h e e t t o o w w r r o o p p e e t t o o t t h h e e s s k k i i l l o o o o p p s s ( ( h h a a n n d d l l e e s s ) ) .
  • Page 137 T T U U N N E E Y Y O O U U R R R R I I D D E E Snowmobile handling and comfort depend upon multiple adjustments. W W A A R R N N I I N N G G S S u u s s p p e e n n s s i i o o n n a a d d j j u u s s t t m m e e n n t t c c o o u u l l d d a a f f f f e e c c t t v v e e h h i i c c l l e e h h a a n n - - d d l l i i n n g g .
  • Page 138 TUNE YOUR RIDE The best way to set up the suspension is to customize each adjustment one at a time. Various adjustments are interrelated. It may be necessary to readjust center spring after adjusting front springs for instance. Test run the snowmobile under the same conditions;...
  • Page 139 TUNE YOUR RIDE N N O O T T I I C C E E W W h h e e n n e e v v e e r r s s t t o o p p p p e e r r s s t t r r a a p p l l e e n n g g t t h h i i s s c c h h a a n n g g e e d d , , t t r r a a c c k k t t e e n n s s i i o o n n m m u u s s t t b b e e c c h h e e c c k k e e d d .
  • Page 140 TUNE YOUR RIDE will improve handling in steep hill climbing and deep snow conditions. S S t t o o p p p p e e r r S S t t r r a a p p S S e e t t t t i i n n g g u u s s e e P P o o s s i i t t i i o o n n Boon docking:...
  • Page 141 TUNE YOUR RIDE A A c c t t i i o o n n R R e e s s u u l l t t Lighter steering Increasing preload More bump absorption capability Decreas Heavier steering Less bump absorption capability preload To adjust, unscrew the locking ring, then turn the adjust- ment ring to set the spring preload.
  • Page 142 TUNE YOUR RIDE Slight suspension bottoming occurring under the worst riding conditions indicates a good choice of spring preload. A A c c t t i i o o n n R R e e s s u u l l t t Firmer rear suspension Higher rear end Increasing...
  • Page 143 TUNE YOUR RIDE T T Y Y P P I I C C A A L L - - D D I I S S T T A A N N C C E E B B E E T T W W E E E E N N G G R R O O U U N N D D A A N N D D U U P P P P E E R R R R E E A A R R A A R R M M P P I I V V O O T T W W h h a a t t t t o o d d o o 90 to 100 mm (3.6 to 4 in)
  • Page 144 TUNE YOUR RIDE 1. Adjustment ring 2. Locking ring C C e e n n t t e e r r a a n n d d R R e e a a r r S S h h o o c c k k A A b b s s o o r r b b e e r r A A d d j j u u s s t t m m e e n n t t s s ( ( K K Y Y B B H H C C L L R R S S e e r r i i e e s s O O n n l l y y ) ) C C o o m m p p r r e e s s s s i i o o n n D D a a m m p p i i n n g g Low speed compression damping controls how the...
  • Page 145 TUNE YOUR RIDE 1. High speed compression adjuster (hexagonal) 2. Low speed compression adjuster (slotted) R R e e s s u u l l t t o o n n b b i i g g T T u u r r n n i i n n g g a a n n d d s s m m a a l l l l A A c c t t i i o o n n b b u u m m p p s s...
  • Page 146 TUNE YOUR RIDE 1. Rebound adjuster R R e e s s u u l l t t o o n n b b i i g g T T u u r r n n i i n n g g a a n n d d s s m m a a l l l l A A c c t t i i o o n n b b u u m m p p s s...
  • Page 147 TUNE YOUR RIDE To obtain the different widths, place the spacers: – Inside the skis leg (narrowest ski stance setting: easiest to initiate turn on sidehills), or – Outside the skis leg (widest ski stance setting: most stabile on corners), or –...
  • Page 148 TUNE YOUR RIDE Front spring preload also has an effect on the steering behavior. A A c c t t i i o o n n R R e e s s u u l l t t Firmer front suspension Higher front end Increasing preload More precise steering...
  • Page 149 TUNE YOUR RIDE C C A A M M T T Y Y P P E E - - H H P P G G S S H H O O C C K K A A B B S S O O R R B B E E R R 1.
  • Page 150 TUNE YOUR RIDE T T Y Y P P I I C C A A L L 1. Spring preload adjustment ring 2. Increase preload 3. Decrease preload F F r r o o n n t t S S h h o o c c k k A A b b s s o o r r b b e e r r A A d d j j u u s s t t m m e e n n t t s s ( ( K K Y Y B B H H L L C C R R S S e e r r i i e e s s O O n n l l y y ) ) C C o o m m p p r r e e s s s s i i o o n n D D a a m m p p i i n n g g Low speed compression damping controls how the...
  • Page 151 TUNE YOUR RIDE 1. Low speed compression adjuster (button) 2. High speed compression adjuster R R e e s s u u l l t t o o n n b b i i g g T T u u r r n n i i n n g g a a n n d d s s m m a a l l l l A A c c t t i i o o n n b b u u m m p p s s...
  • Page 152 TUNE YOUR RIDE 1. Rebound adjuster R R e e s s u u l l t t o o n n b b i i g g T T u u r r n n i i n n g g a a n n d d s s m m a a l l l l A A c c t t i i o o n n b b u u m m p p s s...
  • Page 153 TUNE YOUR RIDE A A d d j j u u s s t t m m e e n n t t T T i i p p s s A A c c c c o o r r d d i i n n g g t t o o V V e e h h i i c c l l e e B B e e h h a a v v i i o o r r P P r r o o b b l l e e m m C C o o r r r r e e c c t t i i v v e e m m e e a a s s u u r r e e s s...
  • Page 154 TUNE YOUR RIDE P P r r o o b b l l e e m m C C o o r r r r e e c c t t i i v v e e m m e e a a s s u u r r e e s s –...
  • Page 155 TUNE YOUR RIDE F F r r o o n n t t S S p p r r i i n n g g / / S S h h o o c c k k a a b b s s o o r r b b e e r r s s e e t t t t i i n n g g s s N N o o r r m m a a l l C C o o m m S S p p o o r r...
  • Page 156 TUNE YOUR RIDE C C e e n n t t e e r r S S p p r r i i n n g g / / S S h h o o c c k k a a b b s s o o r r b b e e r r S S t t o o p p p p e e r r s s t t r r a a p p s s e e t t t t i i n n g g s s N N o o r r m m a a l l ( ( S S t t a a n n d d...
  • Page 157 V V E E H H I I C C L L E E T T R R A A N N S S P P O O R R T T A A T T I I O O N N Make sure that oil reservoir and fuel tank caps are prop- erly installed.
  • Page 158 VEHICLE TRANSPORTATION This page is intention- ally blank...
  • Page 159 M M A A I I N N T T E E N N A A N N C C E E...
  • Page 160 M M A A I I N N T T E E N N A A N N C C E E S S C C H H E E D D U U L L E E Maintenance is very important for keeping your vehicle in safe operating condition.
  • Page 161 MAINTENANCE SCHEDULE E E v v e e r r y y 1 1 5 5 0 0 0 0 k k m m ( ( 1 1 , , 0 0 0 0 0 0 m m i i ) ) Adjust drive chain Verify track tension and alignment.
  • Page 162 MAINTENANCE SCHEDULE E E v v e e r r y y Y Y e e a a r r a a t t p p r r e e s s e e a a s s o o n n o o r r 3 3 0 0 0 0 0 0 k k m m ( ( 2 2 , , 0 0 0 0 0 0 m m i i ) ) ( ( W W h h i i c c h h e e v v e e r r C C o o m m e e s s F F i i r r s s t t ) ) Inspect rear suspension (including stopper straps and slider shoes)
  • Page 163 MAINTENANCE SCHEDULE E E v v e e r r y y 5 5 Y Y e e a a r r s s Replace engine coolant Replace in-line fuel filter...
  • Page 164 M M A A I I N N T T E E N N A A N N C C E E P P R R O O C C E E D D U U R R E E S S This section includes instructions for basic maintenance procedures.
  • Page 165 MAINTENANCE PROCEDURES N N O O T T I I C C E E A A l l w w a a y y s s u u s s e e e e t t h h y y l l e e n n e e - - g g l l y y c c o o l l a a n n t t i i f f r r e e e e z z e e c c o o n n t t a a i i n n i i n n g g c c o o r r r r o o s s i i o o n n i i n n h h i i b b i i t t o o r r s s s s p p e e c c i i f f i i c c a a l l l l y y f f o o r r i i n n t t e e r r n n a a l l c c o o m m - - b b u u s s t t i i o o n n a a l l u u m m i i n n u u m m e e n n g g i i n n e e s s .
  • Page 166 MAINTENANCE PROCEDURES E E x x h h a a u u s s t t S S y y s s t t e e m m E E x x h h a a u u s s t t S S y y s s t t e e m m V V e e r r i i f f i i c c a a t t i i o o n n The muffler tail pipe should be centered with the exit hole in the bottom pan.
  • Page 167 MAINTENANCE PROCEDURES W W A A R R N N I I N N G G U U s s e e o o n n l l y y D D O O T T 4 4 b b r r a a k k e e f f l l u u i i d d f f r r o o m m a a s s e e a a l l e e d d c c o o n n t t a a i i n n - - e e r r .
  • Page 168 MAINTENANCE PROCEDURES T T Y Y P P I I C C A A L L 1. Brake fluid reservoir...
  • Page 169 MAINTENANCE PROCEDURES T T Y Y P P I I C C A A L L 1. Minimum 2. Maximum 3. Operating range C C A A U U T T I I O O N N A A v v o o i i d d g g e e t t t t i i n n g g b b r r a a k k e e f f l l u u i i d d o o n n s s k k i i n n o o r r e e y y e e s s - - i i t t m m a a y y c c a a u u s s e e s s e e v v e e r r e e b b u u r r n n s s .
  • Page 170 MAINTENANCE PROCEDURES C C h h a a i i n n c c a a s s e e O O i i l l R R e e c c o o m m m m e e n n d d e e d d C C h h a a i i n n c c a a s s e e O O i i l l R R e e c c o o m m m m e e n n d d e e d d C C h h a a i i n n c c a a s s e e O O i i l l XPS Synthetic chaincase oil Alternative or if not available...
  • Page 171 MAINTENANCE PROCEDURES C C H H E E C C K K P P L L U U G G Oil level must reach the threaded hole. If level is correct, reinstall check plug and tighten to the specified torque. T T i i g g h h t t e e n n i i n n g g T T o o r r q q u u e e Check plug 6 ±...
  • Page 172 MAINTENANCE PROCEDURES 5. Wait a while to allow all oil to drain out of gearbox. 6. Install drain plug and tighten to specification. t t i i g g h h t t e e n n i i n n g g t t o o r r q q u u e e Gearbox drain plug 6 ±...
  • Page 173 MAINTENANCE PROCEDURES C C H H E E C C K K P P L L U U G G 3. Remove the filler cap. T T Y Y P P I I C C A A L L - - T T O O P P O O F F C C H H A A I I N N C C A A S S E E 1.
  • Page 174 MAINTENANCE PROCEDURES T T i i g g h h t t e e n n i i n n g g T T o o r r q q u u e e Check plug 6 ± 1 Nm (53 ± 9 lbf-in) Reinstall the filler cap.
  • Page 175 MAINTENANCE PROCEDURES N N O O T T I I C C E E O O v v e e r r t t i i g g h h t t e e n n i i n n g g t t h h e e d d r r i i v v e e c c h h a a i i n n c c o o u u l l d d r r e e s s u u l l t t i i n n s s e e - - v v e e r r e e d d a a m m a a g g e e t t o o t t h h e e c c h h a a i i n n c c a a s s e e c c o o m m p p o o n n e e n n t t s s .
  • Page 176 MAINTENANCE PROCEDURES T T Y Y P P I I C C A A L L - - P P U U L L L L E E Y Y E E X X P P A A N N D D E E R R I I N N S S T T A A L L L L E E D D O O N N A A D D J J U U S S T T E E R R H H U U B B 4.
  • Page 177 MAINTENANCE PROCEDURES 1. To be pointed in the direction of rotation 3. Unscrew and remove the driven pulley expander from the pulley. 4. Rotate the driven pulley several times to properly set the belt between the sheaves. 5. If a new belt was installed, an adjustment will be re- quired for the proper belt height.
  • Page 178 MAINTENANCE PROCEDURES 1. Adjuster hub 2. Clamping bolt 4. Using the suspension adjustment tool provided, turn the ring 1/4 turn at a time then rotate the driven pul- ley to properly set the drive belt between the pulley sheaves.
  • Page 179 MAINTENANCE PROCEDURES 1. Suspension adjustment tool N N O O T T E E : : The adjustment ring has left hand treads. 6 6 0 0 0 0 E E F F I I Repeat step 4 until the drive belt outer surface is even with the driven pulley edge.
  • Page 180 MAINTENANCE PROCEDURES T T Y Y P P I I C C A A L L - - P P R R E E L L I I M M I I N N A A R R Y Y S S E E T T T T I I N N G G 1.
  • Page 181 MAINTENANCE PROCEDURES 5. Firmly tighten the clamping bolt. If possible, tighten to specification using a torque wrench. T T i i g g h h t t e e n n i i n n g g T T o o r r q q u u e e 5.5 ±...
  • Page 182 MAINTENANCE PROCEDURES If the vehicle creeps, lower the drive belt height from the preliminary setting. Repeat procedure until creeping stops. R R e e v v e e r r s s e e A A c c t t i i v v a a t t i i o o n n N N O O T T E E : : The reverse may not activate if the belt is positioned too high in the driven pulley.
  • Page 183 MAINTENANCE PROCEDURES This adjustable drive pulley allows setting maximum en- gine RPM to maintain maximum power. Ramp cams should be adjusted so that actual maximum engine RPM matches the maximum horsepower RPM. Refer to Technical Specifications (Engine) . N N O O T T E E : : Use a precision digital tachometer for engine RPM adjustment.
  • Page 184 MAINTENANCE PROCEDURES T T Y Y P P I I C C A A L L 1. Cam 2. Pivot screw The cam position is identified as follows: – Positions 1, 2, 4 and 5 are numbered. – Position 3 (middle) is identified by a notch. –...
  • Page 185 MAINTENANCE PROCEDURES 1. Numbered position 2. Position 3 - Notch 3. Pointers To adjust, proceed as follows for all 3 cams: 3. Using the Allen end of the driven pulley expander, loosen the pivot screw.
  • Page 186 MAINTENANCE PROCEDURES 1. Pivot screw 4. Move the right lever aside to be able to turn the cam. 5. Turn cam to the desired position.
  • Page 187 MAINTENANCE PROCEDURES 1. Desired cam position (here #2) 6. Tighten the pivot screw. T T i i g g h h t t e e n n i i n n g g T T o o r r q q u u e e 8 ±...
  • Page 188 MAINTENANCE PROCEDURES CLICKER ADJUSTMENT LOWER RPM ( 1 & 2 ) -REMOVE TETHER CORD -LOOSEN BOLT HIGHER RPM ( 4 & 5 ) -ADJUST CLICKER -TORQUE BOLT ( 7 @ 9 Nm ) ( 62 @ 80 lbs in ) &...
  • Page 189 MAINTENANCE PROCEDURES If your snowmobile is equipped with a BRP approved studded track, PROCEED WITH A VISUAL INSPEC- TION OF YOUR TRACK BEFORE EACH USE. Look for any defects, such as: – Perforations in the track – Tears in the track –...
  • Page 190 MAINTENANCE PROCEDURES W W A A R R N N I I N N G G T T o o p p r r e e v v e e n n t t s s e e r r i i o o u u s s i i n n j j u u r r y y t t o o i i n n d d i i v v i i d d u u a a l l s s n n e e a a r r t t h h e e s s n n o o w w m m o o b b i i l l e e : : –...
  • Page 191 MAINTENANCE PROCEDURES T T Y Y P P I I C C A A L L - - D D E E F F L L E E C C T T I I O O N N S S E E T T T T I I N N G G 1.
  • Page 192 MAINTENANCE PROCEDURES T T Y Y P P I I C C A A L L 1. Deflection O-ring aligned with slider shoe 9. Read load recorded by the upper O-ring on the tensiometer. T T Y Y P P I I C C A A L L - - L L O O A A D D R R E E A A D D I I N N G G 1.
  • Page 193 4. Tighten or loosen both adjustment screws (equally) to increase or decrease track tension. 1. Loosen the axle nut 2. Tighten or loosen the adjustment screws 5. If correct tension is unattainable, contact an author- ized Lynx dealer. 6. Retighten the rear axle nut to specification.
  • Page 194 MAINTENANCE PROCEDURES T T i i g g h h t t e e n n i i n n g g T T o o r r q q u u e e 24.5 ± 3.5 Nm (18 ± 3 Rear idler wheel nut lbf-ft) and screw...
  • Page 195 MAINTENANCE PROCEDURES A01F05A 1. Guides 2. Slider shoes 3. Equal distance 4. To correct track alignment: 1. Guides 2. Slider shoes 3. Tighten on this side 1. Stop engine. 2. Remove tether cord cap from engine cut-off switch.
  • Page 196 MAINTENANCE PROCEDURES W W A A R R N N I I N N G G R R e e m m o o v v e e t t e e t t h h e e r r c c o o r r d d c c a a p p f f r r o o m m e e n n g g i i n n e e c c u u t t - - o o f f f f s s w w i i t t c c h h b b e e f f o o r r e e p p e e r r f f o o r r m m i i n n g g a a n n y y m m a a i i n n t t e e n n a a n n c c e e o o r r a a d d j j u u s s t t m m e e n n t t , , u u n n l l e e s s s s o o t t h h e e r r w w i i s s e e s s p p e e c c i i f f i i e e d d .
  • Page 197 MAINTENANCE PROCEDURES S S u u s s p p e e n n s s i i o o n n R R e e a a r r S S u u s s p p e e n n s s i i o o n n C C o o n n d d i i t t i i o o n n Visually inspect all suspension components including slider shoes, springs, wheels, etc.
  • Page 198 W W e e a a r r a a n n d d C C o o n n d d i i t t i i o o n n o o f f S S k k i i s s a a n n d d R R u u n n n n e e r r s s Check the condition of the skis and ski runner carbides. If worn, contact an authorized Lynx dealer. W W A A R R N N I I N N G G E E x x c c e e s s s s i i v v e e l l y y w w o o r r n n s s k k i i s s a a n n d d / / o o r r s s k k i i r r u u n n n n e e r r s s w w i i l l l l a a d d - - v v e e r r s s e e l l y y a a f f f f e e c c t t s s n n o o w w m m o o b b i i l l e e c c o o n n t t r r o o l l .
  • Page 199 MAINTENANCE PROCEDURES F F u u s s e e s s L L o o c c a a t t i i o o n n T T Y Y P P I I C C A A L L 1.
  • Page 200 MAINTENANCE PROCEDURES 1. Fuse 2. Check if melted W W A A R R N N I I N N G G I I f f f f u u s s e e b b u u r r n n s s o o u u t t r r e e p p e e a a t t e e d d l l y y , , s s o o u u r r c c e e o o f f m m a a l l f f u u n n c c t t i i o o n n s s h h o o u u l l d d b b e e d d e e t t e e r r m m i i n n e e d d a a n n d d c c o o r r r r e e c c t t e e d d b b e e f f o o r r e e r r e e - - s s t t a a r r t t i i n n g g .
  • Page 201 MAINTENANCE PROCEDURES T T Y Y P P I I C C A A L L 3. Remove the gauge support retaining screws. 4. Lift the front of the gauge support, then slide it for- ward to remove it.
  • Page 202 MAINTENANCE PROCEDURES 5. Set gauge support aside. 6. Remove the storage compartment. 7. Disconnect 12V power outlet connectors to remove (if equipped). 8. Disconnect bulb connector.
  • Page 203 MAINTENANCE PROCEDURES 9. Unlock bulb by turning it counterclockwise. 10. Pull bulb out. N N O O T T E E : : Ensure bulb seal stays in place. 1. Bulb 2. Bulb seal...
  • Page 204 MAINTENANCE PROCEDURES Install a new bulb using the reverse of the removal procedure. N N O O T T I I C C E E N N e e v v e e r r t t o o u u c c h h g g l l a a s s s s p p o o r r t t i i o o n n o o f f a a n n h h a a l l o o g g e e n n b b u u l l b b w w i i t t h h b b a a r r e e f f i i n n g g e e r r s s , , i i t t s s h h o o r r t t e e n n s s i i t t s s o o p p e e r r a a t t i i n n g g l l i i f f e e .
  • Page 205 MAINTENANCE PROCEDURES B B a a t t t t e e r r y y ( ( i i f f e e q q u u i i p p p p e e d d ) ) R R e e m m o o v v i i n n g g B B a a t t t t e e r r y y W W A A R R N N I I N N G G B B a a t t t t e e r r y y B B L L A A C C K K ( ( –...
  • Page 206 MAINTENANCE PROCEDURES T T Y Y P P I I C C A A L L 5. Disconnect negative before positive terminal. 6. Remove battery hold down bracket.
  • Page 207 MAINTENANCE PROCEDURES 7. Remove battery. I I n n s s t t a a l l l l i i n n g g B B a a t t t t e e r r y y The installation is the reverse of the removal procedure. However, pay attention to the following details.
  • Page 208 MAINTENANCE PROCEDURES t t i i g g h h t t e e n n i i n n g g t t o o r r q q u u e e Battery terminals 10 ± 2 Nm (89 ± 18 lbf-in) (positive and negative) Battery hold down 5 ±...
  • Page 209 V V E E H H I I C C L L E E C C A A R R E E P P o o s s t t - - O O p p e e r r a a t t i i o o n n C C a a r r e e Remove snow and ice from rear suspension, track, front suspension, steering mechanism and skis.
  • Page 210 VEHICLE CARE C C o o m m p p a a t t i i b b l l e e C C l l e e a a n n i i n n g g P P r r o o d d u u c c t t s s m m a a t t e e r r i i a a l l t t y y p p e e c c l l e e a a n n i i n n g g P P r r o o d d u u c c t t Soapy water...
  • Page 211 S S T T O O R R A A G G E E During summer, or when a snowmobile is not in use for more than three months, proper storage is necessary. S S t t o o r r a a g g e e Clean the vehicle Add fuel stabilizer to fuel following the product manufacturer recommendations.
  • Page 212 STORAGE N N O O T T I I C C E E F F u u e e l l s s t t a a b b i i l l i i z z e e r r s s h h o o u u l l d d b b e e a a d d d d e e d d p p r r i i o o r r t t o o e e n n g g i i n n e e l l u u - - b b r r i i c c a a t t i i o o n n t t o o e e n n s s u u r r e e c c a a r r b b u u r r e e t t o o r r p p r r o o t t e e c c t t i i o o n n a a g g a a i i n n s s t t v v a a r r n n i i s s h h d d e e p p o o s s i i t t s s .
  • Page 213 STORAGE 4. Repeatedly depress the HI/LOW beam switch rap- idly, then, w w h h i i l l e e d d o o i i n n g g t t h h i i s s , press and hold the S S E E T T b b u u t t t t o o n n until PUSH "S"...
  • Page 214 STORAGE T T Y Y P P I I C C A A L L Do not touch anything during engine lubrication cycle. The engine lubrication function takes approximately 1 minute. During this time the engine RPM will in- crease slightly to approximately 1600 RPM and the oil pump will "oil flood"...
  • Page 215 T T E E C C H H N N I I C C A A L L I I N N F F O O R R M M A A T T I I O O N N...
  • Page 216 These numbers are required by the authorized Lynx dealer to complete warranty claims properly. We strongly recommend that you take note of all the identification numbers on your snowmo-...
  • Page 217 VEHICLE IDENTIFICATION V V e e h h i i c c l l e e I I d d e e n n t t i i f f i i c c a a t t i i o o n n N N u u m m b b e e r r ( ( V V I I N N ) ) VIN is scribed on vehicle description decal.
  • Page 218 VEHICLE IDENTIFICATION T T Y Y P P I I C C A A L L Rotax NRSC H CO2 g/kWh: XXXX MXXXXXXX MM-YYYY Prod. date: Family type: XXXXXX SMB/P V-#### T T Y Y P P I I C C A A L L - - N N R R M M M M I I D D E E N N T T I I F F I I C C A A T T I I O O N N L L A A B B E E L L Depending on your particular vehicle configuration, an additional NRMM identification label may be installed on the tunnel, near the chaincase.
  • Page 219 VEHICLE IDENTIFICATION T T Y Y P P I I C C A A L L 1. NRMM label Bombardier Recreational NRSC H CO2 g/kWh: XXXX Products Inc. MXXXXXXX 565 de la Montagne, Valcourt,QC, Canada Prod. date: MM-YYYY J0E 2L0 Family type: XXXXXX SMB/P V-####...
  • Page 220 V V E E H H I I C C L L E E C C O O M M P P L L I I A A N N C C E E L L A A B B E E L L S S E E P P A A C C o o m m p p l l i i a a n n c c e e L L a a b b e e l l EMISSION CONTROL INFORMATION THIS VEHICLE IS CERTIFIED TO OPERATE ON...
  • Page 221 VEHICLE COMPLIANCE LABELS S S S S C C C C L L a a b b e e l l Safety standards for snowmobiles have been adopted by the Snowmobile Safety and Certification Committee (SSCC) of which BRP is a proud participating member. Assurance that your snowmobile meets these standards is easily checked by locating the Certification Label on a right vertical portion of the vehicle.
  • Page 222 N N O O I I S S E E E E M M I I S S S S I I O O N N A A N N D D V V I I B B R R A A T T I I O O N N V V A A L L U U E E S S 600R MODEL...
  • Page 223 E E C C D D E E C C L L A A R R A A T T I I O O N N O O F F C C O O N N F F O O R R M M I I T T Y Y...
  • Page 224 E E A A C C D D E E C C L L A A R R A A T T I I O O N N O O F F C C O O N N F F O O R R M M I I T T Y Y L L e e f f t t b b l l a a n n k k f f o o r r E E u u r r a a s s i i a a n n C C o o n n f f o o r r m m i i t t y y m m a a r r k k w w h h e e r r e e a a p p p p l l i i c c a a b b l l e e...
  • Page 225 E E P P A A C C E E R R T T I I F F I I E E D D E E N N G G I I N N E E S S E E n n g g i i n n e e E E m m i i s s s s i i o o n n s s I I n n f f o o r r m m a a t t i i o o n n M M a a n n u u f f a a c c t t u u r r e e r r ' ' s s R R e e s s p p o o n n s s i i b b i i l l i i t t y y Beginning with 2 2 0 0 0 0 7 7 m m o o d d e e l l y y e e a a r r e e n n g g i i n n e e s s , snowmobile manufacturers of snowmobile engines need to deter-...
  • Page 226 EPA CERTIFIED ENGINES E E P P A A E E m m i i s s s s i i o o n n R R e e g g u u l l a a t t i i o o n n s s All Ski-Doo snowmobiles manufactured by BRP are cer- tified to the EPA as conforming to the requirements of the regulations for the control of air pollution from new...
  • Page 227 R R A A D D I I O O F F R R E E Q Q U U E E N N C C Y Y D D I I G G I I T T A A L L L L Y Y E E N N C C O O D D E E D D S S E E C C U U R R I I T T Y Y S S Y Y S S T T E E M M ( ( R R F F D D .
  • Page 228 T T E E C C H H N N I I C C A A L L S S P P E E C C I I F F I I C C A A T T I I O O N N S S E E n n g g i i n n e e 8 8 5 5 0 0 E E - - T T E E C C E E n n g g i i n n e e...
  • Page 229 TECHNICAL SPECIFICATIONS E E l l e e c c t t r r i i c c a a l l S S y y s s t t e e m m 30 A @ 14.5 V Lighting system output 1340 W @ 6000 RPM NGK ILKR8Q7...
  • Page 230 TECHNICAL SPECIFICATIONS C C o o o o l l i i n n g g S S y y s s t t e e m m Ethyl glycol and distilled water (50%/50%) Alterna or coolant tive, or if specifically formulated for available...
  • Page 231 TECHNICAL SPECIFICATIONS F F u u e e l l S S y y s s t t e e m m In-tank Fuel pump electrical fuel pump Premium unleaded gasoline (fuel Type which may contain up to 10% MAX ethanol Fuel 91 Pump...
  • Page 232 TECHNICAL SPECIFICATIONS E E l l e e c c t t r r i i c c a a l l S S y y s s t t e e m m Acces 25 A sories Cluster 15 A D D r r i i v v e e S S y y s s t t e e m m Recom XPS Synthetic...
  • Page 233 TECHNICAL SPECIFICATIONS D D r r i i v v e e S S y y s s t t e e m m 417.8 cm DS 4100 (164.5 in) 64 mm (2.5 in) Profile DS 3900 OR 76 mm (3 height DS 4100 Refer to Track...
  • Page 234 TECHNICAL SPECIFICATIONS R R e e a a r r S S u u s s p p e e n n s s i i o o n n PPS2 DS+ DS 4100 4100 390 mm (15.4 Suspension maximum travel KYB 36 Center Shock...
  • Page 235 TECHNICAL SPECIFICATIONS ( ( 1 1 ) ) I I N N J J E E C C T T I I O O N N O O I I L L R R e e f f e e r r t t o o f f o o r r d d e e t t a a i i l l e e d d...
  • Page 236 TECHNICAL SPECIFICATIONS This page is intention- ally blank...
  • Page 237 T T R R O O U U B B L L E E - - S S H H O O O O T T I I N N G G...
  • Page 238 T T R R O O U U B B L L E E S S H H O O O O T T I I N N G G G G U U I I D D E E L L I I N N E E S S E E L L E E C C T T R R I I C C S S T T A A R R T T E E R R D D O O E E S S N N O O T T W W O O R R K K 1.
  • Page 239 TROUBLESHOOTING GUIDELINES E E N N G G I I N N E E R R P P M M D D O O E E S S N N O O T T R R E E A A C C H H C C L L U U T T C C H H E E N N G G A A G G E E M M E E N N T T P P O O I I N N T T 1.
  • Page 240 6. I I n n c c o o r r r r e e c c t t t t r r a a c c k k a a d d j j u u s s t t m m e e n n t t . . – See MAINTENANCE and/or an authorized Lynx dealer for proper alignment and tension adjustments.
  • Page 241 TROUBLESHOOTING GUIDELINES E E N N G G I I N N E E B B A A C C K K F F I I R R E E S S 1. E E n n g g i i n n e e i i s s r r u u n n n n i i n n g g t t o o o o h h o o t t . . –...
  • Page 242 TROUBLESHOOTING GUIDELINES H H E E A A T T E E D D G G R R I I P P S S / / T T H H U U M M B B W W A A R R M M E E R R S S A A R R E E N N O O T T W W O O R R K K I I N N G G 1.
  • Page 243 M M O O N N I I T T O O R R I I N N G G S S Y Y S S T T E E M M P P i i l l o o t t L L a a m m p p s s , , M M e e s s s s a a g g e e s s a a n n d d B B e e e e p p e e r r C C o o d d e e s s Gauge pilot lamp(s) will inform you if an anomaly occurs or to inform you of a particular condition.
  • Page 244 MONITORING SYSTEM P P i i l l o o t t m m e e s s s s a a g g e e B B E E E E P P d d e e s s c c r r i i p p t t i i o o n n l l a a m m p p d d i i s s p p l l a a y y E E R R...
  • Page 245 MONITORING SYSTEM P P i i l l o o t t m m e e s s s s a a g g e e B B E E E E P P d d e e s s c c r r i i p p t t i i o o n n l l a a m m p p d d i i s s p p l l a a y y E E R R...
  • Page 246 MONITORING SYSTEM P P i i l l o o t t m m e e s s s s a a g g e e B B E E E E P P d d e e s s c c r r i i p p t t i i o o n n l l a a m m p p d d i i s s p p l l a a y y E E R R...
  • Page 247 MONITORING SYSTEM P P i i l l o o t t m m e e s s s s a a g g e e B B E E E E P P d d e e s s c c r r i i p p t t i i o o n n l l a a m m p p d d i i s s p p l l a a y y E E R R...
  • Page 248 MONITORING SYSTEM P P i i l l o o t t m m e e s s s s a a g g e e B B E E E E P P d d e e s s c c r r i i p p t t i i o o n n l l a a m m p p d d i i s s p p l l a a y y E E R R...
  • Page 249 W W A A R R R R A A N N T T Y Y...
  • Page 250 S S C C O O P P E E O O F F T T H H E E L L I I M M I I T T E E D D W W A A R R R R A A N N T T Y Y Bombardier Recreational Products Inc. (“ “ B B R R P P ” ” ) war- rants its 2022 Lynx snowmobiles sold by authorized BRP dealers (as defined below) in the United States of America (“USA”) and in Canada from defects in material...
  • Page 251 BRP LIMITED WARRANTY USA AND CANADA: 2022 LYNX SNOWMOBILES ® R R I I G G H H T T S S W W H H I I C C H H M M A A Y Y V V A A R R Y Y F F R R O O M M S S T T A A T T E E T T O O S S T T A A T T E E , , O O R R P P R R O O V V I I N N C C E E T T O O P P R R O O V V I I N N C C E E .
  • Page 252 This warranty coverage is available o o n n l l y y if each of the following conditions has been fulfilled: – The 2022 Lynx snowmobile must be purchased as new and unused by its first owner from a BRP dealer authorized to distribute Lynx snowmobiles in the country in which the sale occurred (“...
  • Page 253 – The 2022 Lynx snowmobile must have undergone proper registration by an authorized BRP dealer; – The 2022 Lynx snowmobile must be purchased in the country in which the purchaser resides; and – Routine maintenance outlined in the Operator’s Guide must be timely performed in order to maintain warranty coverage.
  • Page 254 BRP LIMITED WARRANTY USA AND CANADA: 2022 LYNX SNOWMOBILES ® parts and labor , at any authorized BRP dealer during the warranty coverage period under the conditions de- scribed herein. No claim of breach of warranty shall be cause for cancellation or rescission of the sale of the snowmobile to the owner.
  • Page 255 For all emission-related warranty claims, BRP is limiting the diagnosis and repair of emission-related parts to the authorized Lynx dealers, unless for emergency repairs as required by item 2 of the following list. As a certifying manufacturer, BRP will not deny emis-...
  • Page 256 US EPA EMISSION-RELATED WARRANTY 4. Maintenance that was performed more frequently than BRP specify. 5. Anything that is BRP fault or responsibility. 6. The use of any fuel that is commonly available where the equipment operates unless BRP written mainte- nance instructions state that this fuel would harm the equipment’s emission control system and operators can readily find the proper fuel.
  • Page 257 US EPA EMISSION-RELATED WARRANTY 2. The following parts are also considered emission-re- lated components for exhaust emissions: – Aftertreatment devices – Crankcase ventilation valves – Sensors – Electronic control units 3. The following parts are considered emission-related components for evaporative emissions: –...
  • Page 258 US EPA EMISSION-RELATED WARRANTY caused by the owner’s or operator’s improper mainte- nance or use, by accidents for which the manufacturer has no responsibility, or by acts of God. For example, an emission-related warranty claim need not be honored for failures that have been directly caused by the opera- tor’s abuse of the engine/equipment or the operator’s use of the engine/equipment in a manner for which it was not designed and are not attributable to the manu-...
  • Page 259 M M A A I I N N T T E E N N A A N N C C E E R R E E C C O O R R D D S S Send photocopy of maintenance record to BRP if needed.
  • Page 260 MAINTENANCE RECORDS F F I I R R S S T T i i n n s s p p e e c c t t i i o o n n Mileage / Signature/Print: Hours: Date: Dealer Notes: For maintenance schedule refer to Maintenance Information section of this operator's guide S S e e r r v v i i c c e e Mileage /...
  • Page 261 MAINTENANCE RECORDS S S e e r r v v i i c c e e Mileage / Signature/Print: Hours: Date: Dealer Notes: For maintenance schedule refer to Maintenance Information section of this operator's guide S S e e r r v v i i c c e e Mileage / Signature/Print: Hours:...
  • Page 262 MAINTENANCE RECORDS S S e e r r v v i i c c e e Mileage / Signature/Print: Hours: Date: Dealer Notes: For maintenance schedule refer to Maintenance Information section of this operator's guide...
  • Page 263 MAINTENANCE RECORDS S S e e r r v v i i c c e e Mileage / Signature/Print: Hours: Date: Dealer Notes: For maintenance schedule refer to Maintenance Information section of this operator's guide S S e e r r v v i i c c e e Mileage / Signature/Print: Hours:...
  • Page 264 MAINTENANCE RECORDS S S e e r r v v i i c c e e Mileage / Signature/Print: Hours: Date: Dealer Notes: For maintenance schedule refer to Maintenance Information section of this operator's guide...
  • Page 265 C C U U S S T T O O M M E E R R I I N N F F O O R R M M A A T T I I O O N N...
  • Page 266 P P R R I I V V A A C C Y Y I I N N F F O O R R M M A A T T I I O O N N BRP wishes to inform you that your coordinates will be used for safety and warranty related purposes.
  • Page 267 C C O O N N T T A A C C T T U U S S www.brp.com Sweden Avenue d’Ouchy 4-6 A A s s i i a a 1006 Lausanne Room 4609, Tower 2, Switzerland Grand Gateway 3 Hong Qiao N N o o r r t t h h A A m m e e r r i i c c a a Road Shanghai,...
  • Page 268 CONTACT US S S o o u u t t h h A A m m e e r r i i c c a a Rua James Clerck Max- well, 230 TechnoPark Campinas SP 13069-380 Brazil...
  • Page 269 C C H H A A N N G G E E O O F F A A D D D D R R E E S S S S / / O O W W N N E E R R S S H H I I P P If your address has changed or if you are the new owner of the snowmobile, be sure to notify BRP by either: –...
  • Page 270 CHANGE OF ADDRESS/OWNERSHIP This page is intentionally blank...
  • Page 271 CHANGE OF ADDRESS/OWNERSHIP...
  • Page 272 CHANGE OF ADDRESS/OWNERSHIP This page is intentionally blank...
  • Page 273 CHANGE OF ADDRESS/OWNERSHIP...
  • Page 274 CHANGE OF ADDRESS/OWNERSHIP This page is intentionally blank...
  • Page 275 CHANGE OF ADDRESS/OWNERSHIP...
  • Page 276 CHANGE OF ADDRESS/OWNERSHIP This page is intentionally blank...
  • Page 277 CHANGE OF ADDRESS/OWNERSHIP NOTES...
  • Page 278 CHANGE OF ADDRESS/OWNERSHIP NOTES...
  • Page 279 CHANGE OF ADDRESS/OWNERSHIP NOTES...
  • Page 280 CHANGE OF ADDRESS/OWNERSHIP NOTES...
  • Page 281 CHANGE OF ADDRESS/OWNERSHIP NOTES...
  • Page 282 CHANGE OF ADDRESS/OWNERSHIP NOTES...
  • Page 283 CHANGE OF ADDRESS/OWNERSHIP Model No.
  • Page 284 W W A A R R N N I I N N G G D D i i s s r r e e g g a a r r d d i i n n g g a a n n y y o o f f t t h h e e s s a a f f e e t t y y p p r r e e c c a a u u t t i i o o n n s s a a n n d d i i n n - - s s t t r r u u c c t t i i o o n n s s c c o o n n t t a a i i n n e e d d i i n n t t h h e e o o p p e e r r a a t t o o r r ’...