Lynx Enduro 400 F Owner's Manual page 153

Suspended extension adjustment
Suspended extension can be adjusted according to the load and snow conditions.
For deep snow adjustment
Loosen firts lock nut then tighten nut ¾ turn after contacting washers. Retighten lock nut.
Adjust the same on both sides.
For trail riding with or without a load and for pulling a load, first loosen lock nut. Turn to
a maximum preload of 3 turns after nut touching washers. Retighten lock nut. Adjust the
same on both sides.
Shackle movement limiter
For deep snow riding, do not install horse shoe washers nor rubber stoppers.
For trail riding with passenger and/or weight, install 1 horse shoe washer under each rubber
stoppers.
For trail riding with heavy load and/or pulling a load, use 2 horse shoe washers under each
rubber stoppers.
CAUTION!
Always install same amount of washers on both sides.
1. Horse shoe washer (-s)
2. Nut
3. Lock nut
Front springs-handling
Ride at moderate speed and check for proper handling.
Adjust front springs accordingly.
CAUTION!
Always adjust both front springs to same position.
28 OPERATOR'S GUIDE