Lenovo ThinkSystem SR860 V2 Setup Manual page 53

Cable guides
Make sure all the signal cables go through the cable guides on the system board and the memory expansion
tray.
Figure 19. Cable guides on the system board
Figure 20. Cable guides on the processor and memory expansion tray
SAS/SATA cables for Gen3 and Gen4 RAID adapters
When picking cables for 8i and 16i RAID adapters from SAS/SATA cable kits, make sure to choose the
cables based on the generation of RAID adapters that you plan to install:
• Gen3 RAID adapters (430-8i, 930-8i, 430-16i, 530-16i, 930-16i): MiniSAS to Slimline cable
• Gen4 RAID adapters (940-8i, 940-16i): Slimline cable
Backplane and PCIe slot reference
See the engraving on the cable connector for reference of PCIe slots to installed RAID adapters or PCIe
switch cards in. For example, "BP 1/4" and "Slot 15/14 means the cable could be applied to the following
scenarios:
.
Chapter 3 Internal cable routing
45