Table of Contents
Advertisement
HW2 Protocol Series Installation Guide
LCD Display Operation
Setpoint Function
Z207936-0E
Page 10 of 11
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Button Functions
Change Values
Menu Advance
Change Values
Display Icons
The main screen displays sensor values for RH, room temperature or temperature setpoint and Celsius/Fahrenheit.
Temperature Value
Humidity Value
The Menu Advance button cycles between Temperature, RH, Fan Speed setpoints and Celsius/Fahrenheit adjustment screens in
order.
Temperature Setpoint Adjustment
Press the Menu
Advance button
Note: Numeric information will ash while in Set mode.
RH Setpoint Adjustment
Press the Menu
Advance button
Note: Numeric information will ash while in Set mode.
©2021 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
Override Press
Indicator
Adjusts setpoint up
After adjustment, wait 6 seconds or press the Menu Advance button.
Setpoint is accepted and main screen appears.
Adjusts setpoint down
Adjusts setpoint up
After adjustment, wait 6 seconds or press the Menu Advance button.
Setpoint is accepted and main screen appears.
Adjusts setpoint down
0921
Advertisement
Table of Contents
