Table of Contents
Advertisement
HW2 Protocol Series Installation Guide
Installation (cont.)
Touchscreen Operation
Z207936-0E
Page 8 of 11
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
8. Install locking screw to secure cover in closed position.
Main Screen
The touchscreen user interface displays applicable sensor output values (temperature and RH), setpoint value and menu button.
Setpoint value (temperature setpoint shown)
Menu
20°
button
23
°C
.5
RH
100%
value
Room Temperature Display Option
Menu Screen
The menu screen opens when pressing the Menu button on the main screen. Integrator's submenu, occupancy/override,
Fahrenheit/Celsius, settings and setpoint submenu (temp, RH and fan) buttons are displayed on the menu screen.
Note: RH setpoint will
not appear on non-RH
models.
Menu Button Functions
Integrator's Submenu
Press this icon to access the
Integrator's menu.
Occupied Override Button
Press this icon to provide
momentary signal output to
the controller
Fahrenheit/Celsius Switch
Press this icon to display either
°C or °F.
©2021 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
Menu
button
Fahrenheit/Celsius
Temperature
value
RH
value
Temperature Setpoint Display Option
Submenu Only
Model
HW2TP2A
Serial #
4E54F3B5
Single Press Only
Signals occupied/override
call to controller.
Single Press Only
Changes units to
Fahrenheit when pressed.
Changes units to
Celsius when pressed.
20
°C
Fahrenheit/Celsius
.0
Temperature
setpoint
100%
0921
Advertisement
Table of Contents
