iDM AERO ILM 2-7 Installation Instructions Manual page 28

5. General description
Installation
5.9.3. Assembly instructions air inlet
The wall connection set on the inlet side consists of 4 rubber strips. These are included in the delivery contents
as loose items! First affi x the vertical connection elements. Remove the foil on the rear side. The rubber strips
must be affi xed so that they are fl ush with the factory-mounted cellular rubber on the inner side of the frame
so that the surround the frame.
The horizontal elements are principally laminated on the front side. This guarantees an optimum leak tightness!
20
The bottom horizontal cellular rubber has to be affi xed and fl ush with the projection on the conden-
sate collecting tray. The remaining cellular rubber strips have to be affi xed and be fl ush with the
cellular rubber on the inner side! The metal frame is thus surrounded completely with insulating
material and cold bridge free!
28
870
Installation instructions AERO ILM
20
(C) IDM Energiesysteme GmbH