Table of Contents
Advertisement
Using the EDGE BLENDING features
1. Mode (Manual/Camera)
OFF: Disables the Blending function.
Manual: Allows you to adjust Blending Region or Blending Level by using menu.
Camera: Allows you to perform automatic adjustment by using Camera in Projector
Blending Tool.
NOTE
• Keystone/Perfect Fit/Warping are not selectable when CAMERA is
selected in MODE.
2. Blending Region
2.1 Specifying Blending Region
Select one of the four sides with ▲/▼/◄/► buttons and press ENTER or INPUT
button. Blending Region can be specifi ed for left and right sides with ◄/►
buttons and for top and bottom sides with ▲/▼ buttons.
Specify Blending Region for each projector.
Adjust them referring to the guide displayed during the adjustment of Blending
Region.
NOTE
• The minimum value of Blending Region is 200 dots when MANUAL is
selected in MODE.
• If you adjust BLACK LEVEL when CAMERA is selected in MODE, specify the
Blending Region to specify the adjustment area of BLACK LEVEL.
• When CAMERA is selected in MODE, the menu may not be displayed in the
screen. In that case, you can move the menu to a visible position by using
MENU POSITION. To call MENU POSITION directly, press MENU button
on the remote control for 3 seconds or more. Refer to MENU POSITION in
the SCREEN menu for details of MENU POSITION. You can assign MENU
POSITION to MY BUTTON (1-4) before performing Edge Blending. Refer to
MY BUTTON in the OPTION menu for details of MY BUTTON.
(continued on next page)
Blend Region
Left Image
Guide line
Right Image
5 5
Operating
QM00971-1
Advertisement
Table of Contents
