Table of Contents
Advertisement
Item
COLOR
UNIFORMITY
OSD MESSAGE
(continued on next page)
Selects image level and region must be required corrected, and
adjusts Color Balance.
Divides the screen into nine regions and adjusts gain of R/G/B of
each region.
Using the ▲/▼ buttons turns on/off the message function.
For more information, see "Limiting OSD display" (47) .
NORMAL ó SILENT ó INHIBIT
■SILENT : The following message functions do not work.
"AUTO IN PROGRESS" while automatically adjusting
"NO INPUT IS DETECTED"
"SYNC IS OUT OF RANGE"
"INVALID SCAN FREQ."
"NOT AVAILABLE"
"Searching...." while searching for the input
"Detecting...." while an input signal is detected
The indication of the ZOOM displayed by changing
*While operating from the remote control only.
The indication of the FOCUS displayed by changing
*While operating from the remote control only.
The indication of the input signal displayed by changing
The indication of the aspect ratio displayed by changing
The indication of the PICTURE MODE displayed by changing
The indication of the MY MEMORY displayed by changing
The indication of "FREEZE" and "II" while freezing the screen by
pressing the FREEZE button.
The indication of the TEMPLATE displayed by changing.
The indication of the LIGHT OUTPUT displayed by changing.
■INHIBIT : All message functions do not work.
The available buttons are as follows.
STANDBY, ON
Description
8 9
SETUP menu
QM00971-1
Advertisement
Table of Contents
