Table of Contents
Advertisement
Connecting with your devices (continued)
(Wired) Remote
control
NOTE
• To use a wired remote control, connect a wired remote control to the
REMOTE CONTROL IN port. You can also connect another projector to the
REMOTE CONTROL OUT port to control it from the wired remote control. You
can use this projector as a remote control-relay with the REMOTE CONTROL
IN and OUT ports. To connect the wired remote control or another projector
to the REMOTE CONTROL IN or OUT ports, use audio cables with 3.5 mm
diameter stereo mini plugs. This function is useful when a wireless remote
signal may not reliably reach the projector.
• The signal received in a remote sensor and the remote control signal input
from HDBaseT
TM
• The projector may not be operated correctly if they are operated from multiple
remote controls at the same time.
(continued on next page)
3G-SDI OUT
Another
projector
are also output from REMOTE CONTROL OUT.
Camera for
commercial use
RGB IN
Speakers
(with an amplifi er)
3 3
Setting up
Monitor
HDMI
TM
QM00971-1
Advertisement
Table of Contents
