Table of Contents
Advertisement
Operating
PbyP (Picture by Picture) / PinP (Picture in Picture) (continued)
PbyP / PinP SWAP function
Press the MY BUTTON assigned the PbyP / PinP SWAP (101). The position of
the area is exchanged without any setting change.
main
sub
area
area
NOTE
• For some signals, it may not be displayed correctly in the PbyP / PinP
mode, even if it can be displayed properly in the normal mode.
• PbyP/PinP is unavailable when other than OFF is selected in GEOMETRY
CORRECTION > EDGE BLENDING > MODE.
Changing the size of main area in PbyP mode
Using ▲/▼ buttons on the remote control changes the size of main area in
PbyP mode.
main area
sub area
Changing the position of sub area in PinP mode
1. Select PinP POSITION in INPUT MENU (82).
2. Using ▲/▼ buttons on the remote control changes the position of sub area
in PinP mode.
main area
sub area
sub
main
area
area
PbyP mode
main area sub area
main area
sub area
main area
sub area
main area
main area
sub area
6 4
sub area
main area
PinP mode
sub area
main area
sub area
QM00971-1
Advertisement
Table of Contents
