Table of Contents
Advertisement
Maintenance
Maintenance
Cleaning and replacing the air filter
Check and clean the air filter periodically. When the indicators or a message
prompts you to clean the air filter, comply with it as soon as possible.
1.
Turn the projector off, and unplug the power
cord. Allow the projector to sufficiently cool down.
2.
Use a vacuum cleaner on and around the filter
cover.
3.
Pick and pull up the filter cover knobs to take it
off.
4.
Press up slightly the bottom side knobs to unlock
the bottom side of the air filter, and take it off.
5.
The air filter consists of two parts.
Press down around the interlocking parts to
unlock, then separate the two parts.
Use a vacuum cleaner for both sides of the air filter.
If the air filter is damaged or heavily soiled, replace it with
the new one. Request for an air filter with the following type
number from your dealer when purchasing a new one.
Type number: UX43482
.
Use a vacuum cleaner for the filter vent of the projector.
6
7.
Put back the air filter and filter cover into their place.
8.
Turn the projector on and reset
FILTER TIME item in the EASY MENU.
(1) Press the MENU button to display a menu.
(2) Point at the FILTER TIME using the ▲/ ▼ buttons,
then press the ► button. A dialog will appear.
(3) Press the ► button to select "OK" on the dialog.
It performs resetting the filter time.
(continued on next page)
the filter time using the
12 4
2
Filter cover
3
Filter cover knobs
Air filter
4
Air filter knobs
5
Interlocking
Parts
Filter vent
6
Extra
air filter
QM00971-1
Advertisement
Table of Contents
