Table of Contents
Advertisement
Turning off the power
1.
Press the STANDBY/ON button on the projector or
the STANDBY button on the remote control.
The message "Power off?" appears on the screen for
about five seconds.
2.
Press the STANDBY/ON or STANDBY button again
while the message appears.
The light source goes off, and the POWER indicator
begins blinking in orange. The POWER indicator
stops blinking and lights in a steady orange when the
light source cooling is completed (131).
3.
Attach the lens cover, after the POWER indicator
turns to steady orange.
WARNING
use, as it is too hot.
►Unplug the projector from the power outlet if the projector is not being used.
Remove the power cord for complete separation.
NOTE
• Turn off the projector by following the correct procedure. Power off
the projector after any connected devices are powered off. Do not turn on or off
the projector while connected to a device in operation, unless that is directed in
the manual of the device.
• This projector can automatically turn on/off. Refer to the DIRECT POWER ON
(99), AUTO POWER ON (99) and AUTO POWER OFF (100) items of the
OPTION menu.
►Do not touch around the exhaust vents during use or just after
4 3
Power on/off
indicator
POWER
NETWORK INTERACTIVE
INFO
QM00971-1
Advertisement
Table of Contents
