Table of Contents
Advertisement
Using the menu function
This projector has the following menus:
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK,
SECURITY and EASY MENU.
EASY MENU consists of functions often used, and the other menus are classifi ed
into each purpose and brought together as the ADVANCED MENU.
Each menu is operated using the same methods. While the projector is displaying
any menu, the MENU button on the projector works as the cursor buttons. The
basic operations of these menus are as follows.
ENTER button
NETWORK INTERACTIVE
INFO
RESET button
INFO
1.
To start the MENU, press the MENU button. The MENU you last used (EASY
or ADVANCED) appears. EASY MENU has priority to appear just after
powered on.
2.
In the EASY MENU
(1) Use the ▲/▼ cursor buttons to select an item to
operate. To change it to the ADVANCED MENU,
select the ADVANCED MENU.
(2) Use the ◄/► cursor buttons to operate the item.
In the ADVANCED MENU
(1) Use the ▲/▼ cursor buttons to select a menu.
To change it to the EASY MENU, select the EASY
MENU.
The items in the menu appear on the right side.
(2) Press the ► cursor button or ENTER button to
move the cursor to the right side. Then use the
▲/▼ cursor buttons to select an item to operate and press the ► cursor
button or ENTER button to progress. The operation menu or dialog of the
selected item appears.
(3) Use the buttons as instructed in the OSD to operate the item.
(continued on next page)
Cursor buttons
MENU
button
NETWORK INTERACTIVE
INPUT button
6 5
Operating
QM00971-1
Advertisement
Table of Contents
