Table of Contents
Advertisement
Setting up
Connecting to a power supply (continued)
WARNING
unit is attached to it.
►Use extra caution when connecting the power cord, as incorrect or faulty
connections may result in fire and/or electrical shock.
• Do not touch the power cord with a wet hand.
• Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one. Never modify the power cord. The power cord that
came with the projector is only for this projector. Do not use it for other devices.
• Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
• Do not distribute the power supply to multiple devices. It may overload the
outlet and connectors or loosen the connection. A loose connection in the plug
could result in burns or accidents due to heat generation of the plug.
• Do not place the projector or heavy objects on the power cord and cables.
• Connect the ground terminal for the AC inlet of this unit to the ground terminal
of the building using an appropriate power cord (bundled).
• Do not use the power cord remaining tied together. It could result in high
temperature, fire and smoke.
NOTICE
• This projector is also designed for IT power systems with a phase-
to-phase voltage of 220 to 240 V.
►Do not connect the projector to a power supply while no lens
3 8
QM00971-1
Advertisement
Table of Contents
