Table of Contents
Advertisement
7.2.4 Ste p 4 SSID
Use this screen to enable, disable or edit an SSID profile.
Select an SSID profile and click the
such as the SSID (WiFi network name) and WiFi password, double-click the SSID profile entry from the list.
See
Section 7.2.4.1 on page 52
Note: You cannot add or remove an SSID profile after running the setup wizard.
Wizard: SSID
Fig ure 26
7.2.4.1 Edit SSID Pro file
Use this screen to configure an SSID profile.
The screen varies depending on the security type you selected.
•
: Enter a descriptive name of up to 32 printable characters for the wireless LAN.
SSID
•
: Enter a VLAN ID for the Zyxel Device to use to tag traffic originating from this SSID.
VL AN ID
Ba nd Mo de
IEEE 802.11b/g/n wireless clients. 5 GHz is the frequency used by IEEE 802.11ac/a/n wireless clients.
•
Se c urity T ype
any wireless client to associate this network without authentication.
•
: If you set
Pe rso na l
and 63 case-sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal
characters.
Click
to proceed. Click
O K
7.2.5 Sum m a ry
Use this screen to check whether what you have configured is correct. Click
and complete the wizard setup. Otherwise, click
close the wizard without saving.
Chapter 7 Setup Wizard
Sta tus
for more information.
: Select the wireless band which this profile should use. 2.4 GHz is the frequency used by
: Select
to add security on this wireless network. Otherwise, select
WPA2
to
Se c urity T ype
WPA2
to close the screen without saving.
C a nc e l
NWA50AX User's Guide
switch to turn it on or off. To change an SSID profile's settings,
and select
, enter a pre-shared key of between 8
Pe rso na l
to return to the previous screen or click
Pre v
52
to allow
O PEN
to apply your settings
Sa ve
C a nc e l
to
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
