Example Of Configuration File Download Using Ftp - ZyXEL Communications NWA50AX User Manual

Table 72 Maintenance > File Manager > Configuration File (continued)
L ABEL
Last Modified
Upload
Configuration File
File Path
Browse...
Upload
18.2.1 Exa m ple o f C o nfig ura tio n File Do wnlo a d Using FT P
The following example gets a configuration file named startup-config.conf from the Zyxel Device and
saves it on the computer.
1
Connect your computer to the Zyxel Device.
2
The FTP server IP address of the Zyxel Device in standalone mode is 192.168.1.2, so set your computer to
use a static IP address from 192.168.1.3 ~192.168.1.254.
3
Use an FTP client on your computer to connect to the Zyxel Device. For example, in the Windows
command prompt, type ftp 192.168.1.2. Keep the console session connected in order to see when
the firmware recovery finishes.
4
Enter your user name when prompted.
5
Enter your password as requested.
6
Use "cd" to change to the directory that contains the files you want to download.
7
Use "dir" or "ls" if you need to display a list of the files in the directory.
8
Use "get" to download files. Transfer the configuration file on the Zyxel Device to your computer. Type
get followed by the name of the configuration file. This examples uses get startup-config.conf.
Chapter 18 File Manager
DESC RIPT IO N
This column displays the date and time that the individual configuration files were last changed
or saved.
The bottom part of the screen allows you to upload a new or previously saved configuration file
from your computer to your Zyxel Device.
You cannot upload a configuration file named
If you upload
sta rtup- c o nfig .c o nf
apply the new settings.
Type in the location of the file you want to upload in this field or click
Click to find the .conf file you want to upload. The configuration file must use a
Bro wse ...
".conf" filename extension. You will receive an error message if you try to upload a fie of a
different format. Remember that you must decompress compressed (.zip) files before you can
upload them.
Click to begin the upload process. This process may take up to two minutes.
Uplo a d
NWA50AX User's Guide
syste m - de fa ult.c o nf
, it will replace the current configuration and immediately
172
or .
la stg o o d.c o nf
to find it.
Bro wse ...