Sample Feature Applications; Mbssid - ZyXEL Communications NWA50AX User Manual

7
To quarantine a rogue AP, go to
quarantine, and click
selected, and click
1.3 Sa m ple Fe a ture Applic a tio ns
This section describes some possible scenarios and topologies that you can set up using your Zyxel
Device.

1.3.1 MBSSID

A Basic Service Set (BSS) is the set of devices forming a single wireless network (usually an access point
and one or more wireless clients). The Service Set IDentifier (SSID) is the name of a BSS. In Multiple BSS
(MBSSID) mode, the Zyxel Device provides multiple virtual APs, each forming its own BSS and using its
own individual SSID profile.
You can configure multiple SSID profiles, and have all of them active at any one time.
You can assign different wireless and security settings to each SSID profile. This allows you to
compartmentalize groups of users, set varying access privileges, and prioritize network traffic to and
from certain BSSs.
To the wireless clients in the network, each SSID appears to be a different access point. As in any wireless
network, clients can associate only with the SSIDs for which they have the correct security settings.
For example, you might want to set up a wireless network in your office where Internet telephony (VoIP)
users have priority. You also want a regular wireless network for standard users, as well as a 'guest'
wireless network for visitors. In the following figure,
network for standard users, and
guest user is forbidden access to the wired Land Area Network (LAN) behind the AP and can access
only the Internet.
Chapter 1 Introduction
C O NFIG URAT IO N > Wire le ss > Ro g ue AP
. Make sure the
C o nta inm e nt
.
Apply
G ue st_SSID
NWA50AX User's Guide
Ena b le Ro g ue AP C o nta inm e nt
users have QoS priority,
Vo IP_SSID
is the wireless network for guest users. In this example, the
16
, select the APs you want to
check box is
is the wireless
SSID01