The Receiver Domes - ReSound dot DT3060 Open User Manual

Cleaning the RIE Mold
We recommend that you use a damp cloth to clean the RIE
mold after every time you use it. It's important to keep it
clean from wax so that you will not have wax or bacteria
building up on the mold.
If you no longer can clean the RIE Mold using a damp cloth
we recommend you to contact your hearing care profes-
sional for them to clean it, using water and soap. If your
hearing care professional has instructed you to clean it your-
self this way, please follow the instructions below.
1 2 3
7 8 9
13 14 15
14
4 5 6
10 11 12
16 17 18

The Receiver Domes

The Receiver Air Dome / Receiver Tulip Dome / Receiver
Power Dome should be changed every third month or
sooner if needed. We recommend that you have your
hearing care professional change the Receiver Air Dome
/ Receiver Tulip Dome / Receiver Power Dome for you. If
your hearing care professional instructs you to change
the Receiver domes yourself, make sure that they are
securely fastened to the receiver tube before inserting
them in your ear. A failure to change the domes in
accordance with the instructions could result in injury.
If you have been fitted with a Receiver Power Dome we
strongly recommend that your hearing care professional
change the dome since this needs to be done with a
tool.
How to mount the Receiver Air Dome
The Receiver Air Dome is mounted by pushing it gently
over the receiver at the end of the receiver tube.
15