Cleaning Earmoulds; Cleaning The Receiver Wires And Domes; Change Wax Guards - ReSound LiNX Quattro User Manual

i
CAUTION: DO NOT USE ALCOHOL OR OTHER SOLVENTS TO CLEAN YOUR HEARING AIDS;
THE PROTECTIVE COATING WILL BE DAMAGED.

10.1 Cleaning earmoulds

1. Use a soft, dry cloth to wipe the earmould clean.

10.2 Cleaning the receiver wires and domes

The receiver wire and the receiver dome should be cleaned regularly.
1. Use a damp cloth to wipe down the receiver wire and dome.
i
NOTE: Do not use water when you are cleaning the receiver wires or the receiver domes.
i
NOTE: Receiver wires may become stiff, brittle, or discoloured over time. Contact your hearing
care professional regarding receiver changes.
32

10.3 Change wax guards

If you wear a dome, remove it before following this procedure. To replace wax guards:
Carrying box with eight wax guard Insert the removal tip of the tool into
tools. the used wax guard so that the shaft
touches the rim of the wax guard.
The wax guard tool has two functions: a removal tip to collect the used filter, and a replacement tip with
a white filter. To insert the new wax filters, follow these steps:
Insert the replacement tip of the Gently press the replacement tip
tool into the sound outlet. straight into the sound outlet until the
outer ring lies flush with the sound
outlet.
Slowly pull the wax guard straight
out.
Pull the tool straight out - the new
wax guard will remain in place.
Please remember to re-attach
dome again, or a fresh dome.
33