Inserting And Removing The Device - ReSound dot DT3060 Open User Manual

Inserting and removing the device

Inserting:
1. Hang the instrument over the top of
the ear.
2. Grasp the receiver tube where it bends and push the
receiver dome into your ear canal. The
receiver dome should be placed far
enough into the ear so that the
receiver tube lies flush with your
head. When the receiver dome is
placed appropriately, you should not see the receiver
tube sticking out when you look directly into a mirror.
3. If the hearing care professional has provided
you with a sport lock on the receiver tube,
make sure to position it into the indenta -
tion above the earlobe. If the device
whistles, the most likely reason is that the
receiver dome is not placed correctly in the
ear canal.
Other reasons can be build-up of earwax
in the ear canal. It is also possible that the
instrument settings are not optimal. To help
you solve these issues it is recommended to
contact your hearing care professional.
8
Removing:
1. Grasp the receiver tube where
it bends and pull the receiver
dome out of your ear canal.
2. Lift the hearing instrument
of your ear.
Removing (when using a RIE Mold):
1. Grasp the pull-out cord on the
RIE Mold and pull the RIE Mold
out of your ear canal.
2. Lift the hearing instrument
of your ear.
9