Bornack STRIPE BASIC User Manual page 8

EASY GLIDE CLICK BUCKLE
This buckle only serves to adjust the length of
the straps:
• Tilt the buckle.
• Pull the open strap to tighten until the requi-
red position is reached. To release/loosen the
buckle, tilt and then pull it. When the buckle is
let go, the strap position is maintained.
BACK-LOADING FASTENER
The fastener serves to close and adjust the leg
straps.
• Insert the back-loading frame diagonally and
longitudinally through the large frame. Ensu-
re that the strap end is at the top.
• Slightly tilt the frame of the buckle.
• Pull the respective strap until the required po-
sition is reached. When the strap is let go, its
position is maintained.
• Pull the free strap end tight.
CLICK FASTENER / CLICK LIGHT FASTENER
The fastener serves to close and adjust the leg
straps.
• Using your thumbs and index fingers on both
hands, slightly squeeze the buckle and exert
pressure on the lock wings. If the CLICK
fastener is under tension, it cannot be
opened.
• Pull the respective strap until the required
position is reached.
• If the click fastener is taut, it cannot be
opened.
BELT FASTENERS IN USE
Tighten
8 | 9
Loosen