Table of Contents
Advertisement
EN
STRIPE BASIC IN USE
Check the fit of the arrester harness.
The shoulder harness and leg straps should be
flush to the body but not too tight.
The shoulder harness straps should be set to
the same length. The rear arresting D-ring
must sit centrally between your shoulder bla-
des. If necessary, suspend yourself in the arres-
ter harness to test. If necessary readjust the
harness fitting. Roll up the excess strap end
using the strap end storage feature and secure.
CAUTION:
Check that all fasteners are closed.
CAUTION Observe roll-up direction!
A strap end that is rolled up incorrectly will
restrict the clamp effect of the click-buckle!
COMBINATION
When combining this product with other parts,
there is a risk of mutual impairment with
respect to the function and safety. Compatibili-
ty must be assessed during the risk analysis.
Only combine with personal protective equip-
ment that bears a CE symbol. If you have any
questions about compatibility or you require
help with the risk analyses, feel free to contact
BORNACK.
Advertisement
Table of Contents
