Table of Contents
Advertisement
PREPARATION
Attach V-PROTECT. Check the size
setting. Observe/read the V-PROTECT
User Manual.
A Lift the arrester harness on the rear arresting
D-ring. All harness fasteners need to be open.
Harness must hang freely and may not be
twisted
B Put on the arrester harness like a jacket:
Arms through the shoulder harness.
C 1. Close the chest harness.
The front arresting loops must sit in the
middle at chest height.
CAUTION:
If the front arresting loops are used, both loops
must be placed jointly on the karabiner in com-
pliance with EN 362
2. Adjust the shoulder strap.
Adjust the harness to the body so that the
seat harness is positioned below your
bottom.
3. Close the leg loops.
Pull the leg loops individually between your
legs and then close. Tighten the harness so
that you can place one hand between the
strap and your leg.
STRIPE BASIC IN USE
A
C
6 | 7
B
Advertisement
Table of Contents
