Table of Contents
Advertisement
CLEANING
• Dry damp personal protective equipment in
the air, not on artificial heat sources. Dry
metal components with cloths.
• Clean soiled textile components (e.g. arrester
harnesses and ropes) with lukewarm water
and a little detergent for delicates. Then rinse
carefully and allow to dry in the air. Other
cleaning agents are not allowed!
• If disinfection is necessary, please contact the
e-mail hotline: info@bornack.de
• If the personal protective equipment comes
into contact with saltwater, keep it wet until it
can be rinsed with plenty of distilled water.
• Use compressed air to blow on the unit if
necessary.
LIFE SPAN
The following recommendation applies for the
use of the STRIPE BASIC arrester harnesses:
Maximum usage period after being used for
the first time: 10 years
In ideal storage conditions and annual
inspections, the product may be stored for up
to 3 years before it is used for the first time
without impacting on the stated maximum
usage period. Every further year in storage
reduces the final maximum allowed usage
period by 1 year.
Metal parts are not subject to age-related life
span deadlines. The expert makes a decision
based on his technical expertise and the latest
version of the standard.
OTHER
For reasons of safety, intensive use and/or
extreme application conditions such as sharp
edges, chemical influences, UV radiation etc.
will reduce the usage period. The company
owner needs to take this into account in the
workplace risk analysis.
The company owner must ensure compliance
with the maximum usage period by documen-
ting first-time use in the test card.
The test card at the end of this User Manual
must be presented during the regular expert
inspections and be completed by an expert.
For more details, please visit www.bornack.de
REPAIRS
• Repairs may only be carried out by BORNACK
or in a workshop authorised in writing by
BORNACK.
• Only original spare parts from the manufactu-
rer may be used.
12 | 13
Advertisement
Table of Contents
