Replacing The In-Line Fuel Filter - Wacker Neuson DS70 Operator's Manual

Maintenance
5.10

Replacing the In-Line Fuel Filter

When Every 5 months or every 500 hours (whichever comes first)
Requirements Engine stopped
Fuel tank empty
Replacement in-line fuel filter
Procedure Perform the procedure below to replace the in-line fuel filter (a).
1. Close the fuel valve (b).
1. Clamp and disconnect the fuel lines (c) on both sides of the fuel filter.
2. Remove and discard the old in-line fuel filter in accordance with local
environmental protection legislation.
3. Install the new in-line fuel filter and reconnect the fuel lines.
4. Open the fuel valve.
5. Check for fuel leaks before restarting the machine.
Result The in-line fuel filter has now been replaced.
a
b
c
wc_gr009083
42
DS 70
wc_tx003058gb.fm