Changing The Engine Oil And Filter - Wacker Neuson DS70 Operator's Manual

DS 70
5.4

Changing the Engine Oil and Filter

When Change the engine oil and filter after the first 50 hours of operation, and then every
month or after every 100 hours of operation.
Requirements Engine is stopped, but still warm
Machine is on a level surface
Fresh engine oil (see Technical Data for quantity and type).
Plastic cloth and a container of sufficient volume to collect drained oil
Replacement oil filter
Note: Collect, store and dispose of drained oil in accordance with current
environmental protection regulations.
WARNING
Burn hazard. Engine and exhaust pipe become extremely hot during operation.
Stop the engine and allow the machine to cool before changing the engine oil.
Changing the Perform the procedure below to change the engine oil.
engine oil
1. Place the rammer so that the engine is level.
2. Remove the dipstick (a) and the drain plug (b) to drain the oil.
3. Reinstall the drain plug (b). Torque to 19.6–23.5 Nm (14–17 ft.lbs.).
4. Following the procedure described in Checking the Engine Oil, fill the engine
crankcase through the filler neck with the recommended oil.
5. Reinstall the dipstick.
a
This procedure continues on the next page.
wc_tx003058gb.fm
b
wc_gr008974
35
Maintenance