Wacker Neuson DS70 Operator's Manual page 23

DS 70
Continued from the previous page.
If the rammer cannot be secured in the upright position,
a. Drain the fuel tank to prevent fuel from leaking from the cap (c).
b. Lay the rammer down only as shown and tie it to the vehicle at points (a) and (b).
Transporting Rollers (d) enable the rammer to be rolled from one location to another. Perform
manually
the procedure below to transport the rammer manually.
1. Drain the fuel tank to prevent fuel from leaking from the cap.
2. Lay the rammer down as shown.
3. Raise the rammer by the lifting handle (b).
4. Roll the rammer forward or backward as needed.
wc_tx003056gb.fm
c
a
d
Lifting and Transporting
b
23
wc_gr009070