Operation; Preparing The Machine For First Use; Recommended Fuel - Wacker Neuson DS70 Operator's Manual

Operation

4 Operation
4.1

Preparing the Machine for First Use

1. Make sure all loose packaging materials have been removed from the machine.
2. Check the machine and its components for damage. If there is visible damage,
do not operate the machine! Contact your Wacker Neuson dealer immediately
for assistance.
3. Take inventory of all items included with the machine and verify that all loose
components and fasteners are accounted for.
4. Attach component parts not already attached.
5. Add fluids as needed and applicable, including fuel, engine oil, and battery acid.
6. Move the machine to its operating location.
4.2

Recommended Fuel

Type Use only clean, pure No. 2 diesel fuel with a cetane number (CN) above 45.
Avoiding It is important to maintain cleanliness to avoid problems with the fuel injection
contamination
system, and to prevent premature clogging of the fuel filter.
Close the fuel cap immediately after adding fuel.
Do not open the fuel line or the fuel pump or any other point of the fuel system,
not even to bleed air.
Note: The fuel pump will bleed automatically. This applies even if the fuel tank was
run dry. If the fuel tank runs dry, simply refill the fuel tank and restart the engine.
24
DS 70
wc_tx003057gb.fm