Table of Contents
Advertisement
Table 2.3: USB connector pin assignments
Pin
1
2
2.3 Connect the Power
1.
Connect the power adapter cord with the AC power cord.
2.
Connect the power adapter cable to the player's DC power port.
3.
Plug the AC power cord into a power outlet and the PWR LED will be on when
the main power(+3.3V) is established. If you plug the AC adapter in, the standby
power is established but not the main power. The main power should be estab-
lished after you press the power button!
Warning! Only use the power adapter packaged with the DSA-3020. Using a dif-
ferent power adapter could damage the device.
2.4 Connect to a Display
Connect to DVI-D LCD Panel or HDMI Panel via DVI-D to HDMI adapter.
Figure 2.9 USB connector
Definition
VCC
USB_P-
Figure 2.10 Power port
Pin
Definition
3
USB_P+
4
GND
11
DSA-3020 User Manual
Advertisement
Table of Contents
