Pnp/Pci Configurations - Advantech DSA-3020 User Manual

4.2.7 PnP/PCI Configurations

Note! This "PnP/PCI Configurations" option is setting up the IRQ and DMA
(both PnP and PCI bus assignments.
Init Display First
This item is setting for start up Video output from PCI or Onboard device.
Reset Configuration Data
This item allow the user to clear any PnP configuration data stored in the BIOS.
Resources Controlled By
– IRQ Resources
This item allows you respectively assign an interruptive type for IRQ-3, 4, 5,
7, 9, 10, 11, 12, 14, and 15.
– DMA Resources
This item allows you respectively assign an interruptive type for DMA, 0, 1,
2, 3, 4, 5, 6, and 7.
PCI VGA Palette Snoop
The item is designed to solve problems caused by some non-standard VGA
cards. A built-in VGA system does not need this function.
INT Pin 1~8 Assignment
The interrupt request (IRQ) line assigned to a device connected to the PCI inter-
face on your system.
[PCI Slot]
[Disabled]
[Auto (ESCD)]
[Disabled]
[Auto]
29 DSA-3020 User Manual