6
enter the menu system.
2.2. Attach a USB keyboard to the DSA-2130
You must attach a USB keyboard to the DSA-2130 to configure the media player. It takes
approximately 30 seconds for the following menu to be displayed:
1
Navigating the menus
Navigate the menus using arrow keys, space bar, enter key, and numeral keys on your USB keyboard.
Use the keyboard arrow keys to highlight menu items, press the space bar to move the star (cursor),
and then press enter to confirm (<OK>) or reject (<Cancel>) any changes.
NOTE: If you plan to use your DSA-2130 as a standalone media player without a connection to
your network, please proceed to Section 2.3 to complete configuration.
2.3. Connect the DSA-2130 to your network
Attach a LAN cable (RJ-45) to your DSA-2130 media player.
If you plan to attach the DSA-2130 to your network, you will need to assign an IP address from your
network. This is accomplished by two possible ways:
1) DHCP – Automatically Assign Network IP Address
Highlight "Network setting" and press "Enter" on the
keyboard to select.
Press "Enter" on keyboard to
Note IP address assigned by network.
s
e