Related Manuals for Advantech DS-270
Summary of Contents for Advantech DS-270
- Page 1 User Manual DS-270 Advanced Graphic Performance OPS Computing Player with Intel J1900 Processor...
- Page 2 The documentation and the software included with this product are copyrighted 2015 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. also reserves the right to improve the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd.
-
Page 3: Declaration Of Conformity
Product Warranty (2 years) Advantech warrants the original purchaser that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products that have been repaired or altered by persons other than repair personnel authorized by Advantech, or products that have been subject to misuse, abuse, accident, or improper installation. -
Page 4: Packing List
Technical Support and Assistance Visit the Advantech website at http://support.advantech.com for the latest prod- uct information. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you require additional assistance. Please have the following information ready before calling: –... -
Page 5: Safety Instructions
The sound pressure at the operator position does not exceed 70 dB (A), as per IEC 704-1:1982. DISCLAIMER: These instructions are provided according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of all statements contained herein. DS-270 User Manual... - Page 6 DS-270 User Manual...
-
Page 7: Table Of Contents
Display ..................2 1.2.3 Power Consumption..............2 Hardware Specifications ................3 Mechanical Specifications................. 4 1.4.1 Dimensions ................... 4 Figure 1.1 DS-270 Mechanical Dimensions (Unit: mm)....4 1.4.2 Weight................... 4 Power Requirements................. 4 1.5.1 System Power:................4 1.5.2 RTC Battery: ................. 4 Environmental Specifications .............. - Page 8 Boot BIOS Feature Setup ............29 Figure 3.12Boot Configuration setup screen ......29 3.2.6 Save & Exit BIOS Feature Setup..........30 Figure 3.13Save & Exit Configuration setup screen....30 Chapter Software..........33 Intel® TXE Driver Installation..............34 DS-270 User Manual viii...
-
Page 9: Chapter 1 General Introduction
Chapter General Introduction This chapter gives background information regarding the DS-270 series. -
Page 10: Introduction
USB2.0 signals with the monitor. Through UART, it is easy to get status and manage- ment reports. DS-270 also has Giga LAN x1, HDMI x1 (up to 3840x2160@30MHz) and USB3.0 x2 via front I/O. DS-270 Digital Signage player empowers intelligent environments. -
Page 11: Hardware Specifications
Standard: IEEE 802.3z/ab (1000 Base-T) or IEEE 802.3u 100 Base-T Resolution: HDMI: Up to 3840 x 2160 @ 30 Hz (Ultra HD) Caution! For systems with only one RAM module, please insert the module into the SODIMM 1 slot before system bootup. DS-270 User Manual... -
Page 12: Mechanical Specifications
Dimensions 200 x 118 x 30 mm (OPS compliant) 6.10 100.04 39.75 3.50 3.50 Figure 1.1 DS-270 Mechanical Dimensions (Unit: mm) 1.4.2 Weight 1.5 kg (3.3 lb) Power Requirements 1.5.1 System Power: Rating 12 ~ 24 VDC, 5-2.5A (Optional) via OPS connector 1.5.2... -
Page 13: Environmental Specifications
-20 ~ 70 °C (-4 ~ 158 °F) 1.6.4 Vibration Loading During Operation (HDD) 0.2 Grms, IEC 60068-2-64, random, 5 ~ 500 Hz, 1 Oct./min, 1 hr/axis. 1.6.5 Safety UL, CB, BSMI, CCC 1.6.6 CE, FCC Class B, BSMI, C-Tick DS-270 User Manual... - Page 14 DS-270 User Manual...
-
Page 15: Chapter 2 Hardware Installation
Chapter Hardware Installation This chapter introduces external I/O and the installation of DS-270 Hardware. -
Page 16: Ds-270 I/O Connectors
DS-270 External I/O Connectors 2.2.1 Power ON/OFF Button DS-270 has a power ON/OFF button on the front side. Push this button to turn the system ON and OFF. It also supports a 4 second delay soft power off. Figure 2.1 Power ON/OFF Button 2.2.2... -
Page 17: Ethernet Connector (Lan)
StdA_SSTX+ 2.2.3 Ethernet Connector (LAN) DS-270 provides one RJ-45 LAN interface connector, fully compliant with IEEE802.3u 10/100/1000 Base-T CSMA/CD standards. The Ethernet port provides a standard RJ-45 jack connector with LED indicators to show its Active/Link status and speed status. -
Page 18: Hdmi
2.2.5 HDMI DS-270 is designed for HDMI for 1pcs to communicate full video or sounds and fol- low HDCP. HDMI follow HDCP standard simultaneously. Figure 2.5 HDMI Connector Table 2.3: HDMI Pin out Signal Name TMDS Data 2+ TMDS Data 2 shield... -
Page 19: Hardware Installation
TMDS2+ USB_PP0 HDMI_DDC_DATA AZ_LINEOUT_L HDMI_DDC_CLK AZ_LINEOUT_R HDMI_HPD HDMI_CEC +12V~+24V PS_ON# +12V~+24V PWR_STATUS +12V~+24V +12V~+24V +12V~+24V +12V~+24V +12V~+24V +12V~+24V Hardware Installation 2.3.1 Storage Installation To assemble the storage module, secure the HDD to HDD bracket with 2 screws. DS-270 User Manual... -
Page 20: Figure 2.7 Hdd Installation
Undo the top storage screws and remove. Install the storage module into DS-270 as below, and connect the storage and SATA connector onto the device. Lastly, fix the storage module onto DS-270 via a single screw. HDD module installation HDD module Conn ector si de Figure 2.7 HDD Installation... -
Page 21: Memory 1 Installation
Undo 4 screws on the top chassis and remove. Please be careful to avoid any fan cable damage. Install memory into the SO-DIMM1 slot. Lastly, follow the below steps and install the whole system. Memory Figure 2.8 Memory 1 Installation DS-270 User Manual... -
Page 22: Memory 2 Installation
2.3.3 Memory 2 Installation Remove 5 screws on the bottom chassis of DS-270. Install memory into the SO-DIMM 2 slot. Lastly, follow the steps to install the whole system. Memory Figure 2.9 Memory 2 Installation DS-270 User Manual... -
Page 23: Mini Pcie Card
2.3.4 Mini PCIe Card Remove 5 screws on the bottom chassis of DS-270. Install the mini-PCIe card into the mini-PCIe slot. Lastly, follow the steps below and install the whole system. Mini PCIE Figure 2.10 mini-PCIe Installation DS-270 User Manual... - Page 24 DS-270 User Manual...
-
Page 25: Bios Settings
Chapter BIOS Settings This chapter introduces how to set BIOS configuration data. -
Page 26: Bios Introduction
BIOS Introduction With the AMI BIOS Setup program, you can modify BIOS settings and control various system features. This chapter describes the basic navigation of the DS-270 series BIOS setup screens. AMI BIOS’s ROM has a built-in setup program that allows users to modify the basic system configuration. -
Page 27: Advanced Bios Features Setup
3.2.2 Advanced BIOS Features Setup Select the Advanced tab from the DS-270 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>... -
Page 28: Figure 3.3 Acpi Setup Screen
ACPI Settings System ACPI Parameters Figure 3.3 ACPI setup screen Intel® Smart Connect Technology Intel® Smart Connect Technology settings. Default is disabled. DS-270 User Manual... -
Page 29: Figure 3.4 Hw Monitor Screen
ITE8528E HW Monitor Monitor hardware status (PC health status) Figure 3.4 HW Monitor screen S5 RTC Wake Settings Enable/disable system wake from S5 using RTC alarm Figure 3.5 S5 RTC Wake setup screen DS-270 User Manual... -
Page 30: Figure 3.6 Cpu Configuration Setup Screen
Serial Port Console Redirection Serial Port Console Redirection. CPU Configuration CPU Configuration Parameters. Figure 3.6 CPU Configuration setup screen PPM Configuration Enable/disable CPU C state report to OS DS-270 User Manual... -
Page 31: Figure 3.7 Ide Configuration Setup Screen
IDE Configuration IDE devices configuration. Figure 3.7 IDE Configuration setup screen DS-270 User Manual... -
Page 32: Figure 3.8 Miscellaneous Configuration Setup Screen
PCI Express Dynamic Clock Gating Enable/disable PCIe dynamic clock gating – OS Selection The OS selection should be set and matched with applied OS. Figure 3.8 Miscellaneous Configuration setup screen CSM Configuration Enable/Disable, Option ROM execution settings, etc. DS-270 User Manual... -
Page 33: Figure 3.9 Usb Configuration Setup Screen
The value options available are 10, 20, 30, and 40 seconds. – Device Power-Up Delay Allows auto/manual configuration of the USB mass storage device Start Unit Command timeout value. Figure 3.9 USB Configuration setup screen DS-270 User Manual... -
Page 34: Figure 3.10Intel® Txe Configuration Setup Screen
Security Configuration Intel® Anti-Theft Technology configuration Figure 3.10 Intel® TXE Configuration setup screen DS-270 User Manual... -
Page 35: Chipset Bios Feature Setup
3.2.3 Chipset BIOS Feature Setup Select the Chipset tab in the DS-270 BIOS Setup Utility to enter the Chipset BIOS setup screen. Users can select any item displayed in the left frame. North Bridge North Bridge parameters – Memory Information Max TOLUD: Maximum value of TOLUD ... -
Page 36: Security Bios Feature Setup
Security BIOS Feature Setup Select the Security tab from the setup screen to enter the Security BIOS Setup screen. Figure 3.11 Security Configuration setup screen Administrator Password Set Administrator Password. User Password Set User Password. DS-270 User Manual... -
Page 37: Boot Bios Feature Setup
3.2.5 Boot BIOS Feature Setup Select the Boot tab in the DS-270 BIOS Setup Utility to enter the Boot BIOS setup screen. Users can select any item displayed in the left frame. Figure 3.12 Boot Configuration setup screen Setup Prompt Timeout Number of seconds to wait for setup activation key. -
Page 38: Save & Exit Bios Feature Setup
Save the changes done so far as User Defaults. Restore User Defaults Restore the User Defaults to all the setup options. Boot Override – UEFI Built-in EFI Shell – Launch EFI Shell From File System Device DS-270 User Manual... - Page 39 Attempts to Launch EFI Shell application (Shell.efi) from one of the available file system devices. – Reset System With ME Disable Mode MEUD000 ME will runs into the temporary disable mode, ignore if ME ignition FWMED001. DS-270 User Manual...
- Page 40 DS-270 User Manual...
-
Page 41: Software
Chapter Software This chapter highlights the OS installation prompts. -
Page 42: Intel® Txe Driver Installation
Intel® TXE FW 1.1.0.1089 is possible however a downgrade from Intel® TXE FW 1.1.0.1113 to an earlier kit is not possible. Caution! Caution! Before OS installation, the selected OS should be specified and match the OS employed by the BIOS (refer to Figure 3.8). DS-270 User Manual... - Page 43 DS-270 User Manual...
- Page 44 No part of this publication may be reproduced in any form or by any means, such as electronically, by photocopying, recording, or otherwise, without the prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2015...
Need help?
Do you have a question about the DS-270 and is the answer not in the manual?
Questions and answers