Table of Contents
Advertisement
4.
Place the SDRAM (200 pin) module into the socket on the board.
5.
Carefully press down the DRAM module until you hear a "click".
3.3 Installing the 2.5" Hard Disk Drive (HDD)
You can attach one enhanced Integrated Device Electronics (IDE) hard disk drive to
the DSA-3020's internal controller which uses a local bus interface. The advanced
IDE controller supports faster data transfer.
1.
Fix your HDD on the rim to the HDD mounting top cover using the 4 screws
found in accessories box.
DSA-3020 User Manual
Figure 3.4 The bottom side of DSA-3020
Figure 3.5 Installing the 2.5" Hard Disk Drive (HDD)
16
Advertisement
Table of Contents
