2.1 Connecting the Power
1.
Connect the power adapter cord with the AC power cord.
2.
Connect the power adapter cable to the player's DC 12 V power port.
3.
Plug the AC power cord into a power outlet and the Power LED (green) will light
up.
Warning! Only use the power adapter packaged with the DSA-2130E. Using a dif-
ferent power adapter could damage the device.
2.2 Connecting to a Display
Connect your display to the Digital Signage Player's DVI port with the DVI cable that
came with your display. Consult your display's user manual for cabling specifications.
Note!
1.
2.
DSA-2130E User Manual
The DSA-2130E is equipped with DVI-I port which can output the
display with VGA (D-sub 15-pin) connector through a DVI-I-to-VGA
adaptor.
If you would like to use the Composite or S-Video video output, you
need to change the player's configuration setting with the DSA
Configurator.
8