Rs232; Ethernet Connector (Lan); Usb Connector - Advantech DSA-3020 User Manual

2.2.5 RS232

Pure RS-232 standard compliant, but does not support wake-up from ring function.
and Pin 9 is for "Ring" only.

2.2.6 Ethernet Connector (LAN)

The DSA-3020 is equipped with an Intel MARVEL 88E8071(WOL supported) Fast
Ethernet controller that is fully compliant with 10/100/1000 IEEE 802.3. The Ethernet
port provides a standard RJ-45 jack connector with LED indicators on the front side
to show its Active/Link status (Green LED) and Speed status (white LED).
Table 2.2: Ethernet connector pin assignments
Pin
1
2
3
4
5
6
7
8

2.2.7 USB Connector

The DSA-3020 provides 2 connectors for USB interface, which gives complete Plug
& Play and hot swapping for up to 127 external devices. The USB interface complies
with USB UHCI, Rev. 2.0. The USB interface can be disabled in the system BIOS
setup. The USB interface supports Plug and Play, which enables you to connect or
disconnect to a device whenever you want, without turning off the computer.
DSA-3020 User Manual
Figure 2.7 RS-232
Figure 2.8 Ethernet connector
10/100 Base Signal Name
XMT+
XMT-
RCV+
No Connection
No Connection
RCV-
No Connection
No Connection
10