Thank you for purchasing the CPE. This CPE brings you a high speed wireless network connection. This document will help you understand your CPE so you can start using it right away. Please read this document carefully before using your CPE. For detailed information about the functions and configurations of the CPE, refer to the online help on the web management page that comes with the CPE.
○ Power indicator Steady blue: The device is powered on. The power adapter is in use and working properly, or the power adapter is not in use but the battery level is high. Alternating blue and pink: The device is powered on. The power adapter is not in use or not working ...
Steady pink: The device is malfunctioning. Note: If your device malfunctions, power it off. Wait at least 15 minutes before you power it on again. If the problem persists, contact your dealer. Off: The device is powered off. ○...
After the WPS function is enabled, press and hold this button for more than 2 seconds to initiate WPS interconnection. ○ External antenna port Connect to an external antenna. ○ Power button Press this button to power the device on or off. ○...
Note: Do not remove the USIM card when it is in use. Doing so will affect the performance of your CPE and data stored on the USIM card may be lost. The CPE automatically charges its battery when connected to a power source. ...
Note: Only use power adapters compatible with the CPE and provided by a designated manufacturer. Use of an incompatible power adapter or one from an unknown manufacturer may cause the CPE to malfunction, fail, or could even cause a fire. Such use voids all warranties, whether expressed or implied, on the product.
Cable Connection When connecting, use the power adapter that came as a set with the product. When finished, press the power button to turn on the device. The connection cable illustration is for reference only. When the device is in use, you can alter its position or orientation to improve signal reception. The signal strength light indicates the received signal strength.
Logging In to the Web Management Page The web-based configuration utility can be used for initial device installation, parameter configuration, and function management through the browser. The Windows XP operating system and Internet Explorer 7.0 are used as an example. Ensure that the device is connected to the computer.