Ms0001 - Structural Part Inspection - Haulotte OPTIMUM 8 Maintenance Book

General data
Structural part inspection
General data
Structural part inspection
1 - You will need
• Standard tool kit
• Protective goggles
• Gloves
Exclusively use tools and auxiliary average adapted. Always wear necessary safety clothing.
For safety reasons, imperatively respect the following stages during the tests :
• To set up e beaconing of safety around the test area.
• To put the machine in position transport (horizontal jib accepted)
• Use safety straps.
2 - Preliminary operation
The operations of disassembling if they exist should be carried out only on the installations completely disconnected
and must be entrusted only to people having the necessary technical training.
Respect, in addition to the instructions appearing in the present instructions, the legal tendencies generally applicable
for safety accident prevention.
All the precautions must be done in work before intervening on and near the machine.
After completion of work, all the covers and safety devices must be positioned back completely and operational.
4001069810 E 12.19
MS0001
• Place barriers around the perimeter of the work area
USA / GB 53