OPTIMUM 8 - OPTIMUM 1931 E
D
- Inspection and maintenance schedule
Check the operation of the load control
system - Calibrate if necessary
Test the overriding system
5 - Major inspection
The inspection is a thorough inspection of the machine to ensure that it is fully functional. It must be carried out
after 10 years then every 5 years.
This inspection is the responsibility of the owner and must be carried out by a technician HAULOTTE Services®
or an authorized and qualified person.
In order to carry it out, contact the subsidiary HAULOTTE® or the authorized distributor.
N.B.-:-T
HE LIST OF
. C
REQUEST
52
4001069810
M
S
AINTENANCE
HAULOTTE S
ONTACT
ERVICES
Machine sheet
HEETS IS NOT EXHAUSTIVE
®.
E 12.19
. O
S
THER
HEETS MAY BE SENT UPON
USA / GB