Periodic Inspection - Haulotte OPTIMUM 8 Maintenance Book

OPTIMUM 8 - OPTIMUM 1931 E
D
- Inspection and maintenance schedule

4 - Periodic inspection

The Periodic inspection is a thorough inspection of the operation and safety features of the machine. This must
take place prior to the sale or resale of the machine and every 1 year. Local regulations may have specific
requirements on frequency, and content of inspections.
This intervention must take place after :
• Extensive dismantling and reassembly
• Repairs involving the machine's essential components
• Any accident causing stress to the machine
This inspection is the responsibility of the owner, and must be conducted by a qualified technician.
Under no circumstances may this inspection replace the control required by local regulations.
Use the detailed program below.
Periodic
Chassis assembly : Wheel, reducer, steering, wheel pivot
Check state of tires/tyres and inflations
Batteries
Check the condition of the battery
Hydraulic : oils, filters and hoses
Check the hoses, blocks and pumps,
fittings, cylinders and the tank for the
absence of leaks, deformations and
damage
Platform
Test the closure and locking of access
platform
Check that the harness anchor points are
not cracked or damaged
Check the quick ties and the good location
of the guardrail
50 4001069810
Page or
associated
procedure
E 12.19
OK NOK Comments
USA / GB