Table of Contents
Advertisement
H14TX - HB40 - H16TPX - HB44J
C
- Maintenance
6 - Major inspection
Major inspection allow determining the suitability, integrity and proper functioning of the machine : It
must take place when the machine is 10 years or 5000 h after renewed every 5 years.
This inspection is the responsibility of the owner, and it must be conducted by a HAULOTTE Services®
technician.
This inspection shoumld include the daily inspection, periodic inspection of the expanded inspection,
refer to owner's manual for details.
Visual inspection with small disassembly or movement
needed to reach the part. Replacement is necessary.
Proof tests. Need HAULOTTE Services® authorization. For countries where machines are not subject to
controlled periodic maintenance.
5 - Frame, axle, steering system, stabilizers arms ...
No deterioration and visible damage
7 - Pin, pin stop, bearing ...
Bushes and bearing replacement realized
8 - Pulleys, chains and wire rope
Chains and wire rope replacement realized
9 - Wear pads and devices of guidance
Wear pads replacement realized
10 - Cylinder and hydraulic component : pump, filters, manifold
Adjusting the hydraulic pressure realized
Additional inspection
Daily inspection checked
Periodic inspection checked
Maintenance program realized
4000364740
Major inspection
In addition with daily inspection program
E12.14
Systematic replacement
Yes
No
Corrected
US/GB
A
B
C
D
Not applicable
E
F
G
H
I
47
Hide quick links:
Advertisement
Table of Contents
